Thanks for your answer.  Yes, all 4 services are installed and running and yes, I am using https.  This does not work in Mozilla or IE, so I don't see how it can be a browser issue.  Any other ideas? 

What version of Windows are you running on the server?
What is the file name you downloaded to install OMSA?

1. Disable IESEC
2. Add this address to the trusted sites: https://127.0.0.1:1311 
3. Change the trusted sites security level to the lowest setting
4. Try connecting to the above site

Thanks

Hello miggiethor

Are you specifying HTTPS when you try to connect? If you don't then it will not work.

https://127.0.0.1:1311/

There are four OMSA services that all start with DSM in their name. Make sure all four are present and running. Almost anything beyond the correct address being used and the services running would be a browser issue.

Thanks

32bit

This is SErver 2003 R2 SP2

32 or 64 bit?

I had already done all the steps except change trusted sites to lowest setting.  Made no difference.  Again, this doesn't work in Mozilla either, and I just tried Chrome and it doesn't work there either.

This is SErver 2003 R2 SP2 and the filename is

I know that version is labeled as 32 bit compatible, but uninstall it and install this version:

http://www.dell.com/support/drivers/us/en/04/DriverDetails/Product/poweredge-t300?driverId=NVRR4&fileId=3267736217&osCode=WNET

Let me know if that one works.

Thanks

I was so hoping that an older version might work, but I removed the newer one and installed the one you listed, and I have the exact same problem.

I'll try to reproduce the issue tomorrow. The only suggestion I have between now and then is to keep trying older versions. Here is a link for 6.5:

http://www.dell.com/support/drivers/us/en/19/driverdetails?driverid=G2WT6

You have restarted the server, right?

You are the DEAL!!!!  Version 6.5 worked!  I have been working on this for so long, and the answer was the older version.  Thank you very much.