UNSOLVED
EMC Unity 350f Sas 3.84TB ssd 6/12Gb
Hi!
I need you help with streng case regarding disk installation in unity 350f.
I have new disk 2.5 flash SAS 3.84TB 6/12Gb and disk is installed in orginal frame disk but on frame disk I have logo 3.2TB but as I wrote disk inside the frame is 3.84TB capacity! In the storage I see only 2.92 TB capacity available? What is wrong? Is possible that frame is not supporting this size of disk or?
So frame 3.2TB but disk 3.84tb…?
can you explain me How it works?
thank you
801
0
Posted April 26th, 2022 12:00
- Hi! P/N:MZILT3T8HALS-000C
- model:MZ-ILT3T8A
798
0
Posted April 26th, 2022 12:00
Hi,
https://dell.to/3OCzMkK Page 3 it does seem like it is reporting smaller than it should. Did the drive come from Dell?
796
0
Posted April 26th, 2022 13:00
- Yes disk is from Dell.
but is maybe disk frame is 3.2 so is not possible to reach More than 2.92 because as I wrote disk is 3.84 but frame for disk has sticker 3.2 on the front. There is any impact if i have different size of disk and different frame ??
- Yes disk is from Dell.
796
0
Posted April 26th, 2022 13:00
Is it replacing one that is 3.84 or is it going to be separate?
793
0
Posted April 26th, 2022 14:00
Why I was asking is that if it is replacing a drive that currently is 3.84 it won’t have enough space. If this is the first 3.84 drive you may need to upgrade the OE to support it. However to the best of my knowledge the frame and drive should match and the frame being smaller is probably the issue.
794
0
Posted April 26th, 2022 14:00
- It is new disk. Only difference is that disk frame is with 3.2TB label but disk inside the frame is 3.84tb. In the unity system I see only 2.92tb so again question it is disk limitation or bad disk frame…?
DELL-Josh Cr
Community Manager
•
9700 Posts
•
43747 Points
808
0
Posted April 26th, 2022 09:00
Hi,
Do you have the part number or model number? It probably is the raw capacity of the drive. It probably has some reserved for wear leveling.
Let us know if you have any additional questions.