UNSOLVED
Issues setting up Brocade and CX Array
Hello,
I am having trouble setting the first page in array setup. I had NaviCli installed on the same server. I tried another windows/linux boxes with no luck.
I get error "Authentication failure occurred due to invalid user name or password" and I know for sure there is no FW and the username/password is correct.
I am also still waiting on the brocade document on how to comfifgure SMI agent.
Thanks
DELL-Mike Mck
24 Posts
145
0
Posted September 1st, 2010 18:00
For the Brocade switches, I installed this software:
www.brocade.com/.../application_matrix.page
Brocade SMI Agent v120.9.0
It is installed on a different server than I installed vFoglight Storage on. I installed with all defaults and turned the firewall off on the Brocade SMI agent Windows server.
When I configured vFoglight Storage, I configure the Brocade FC Switch setup to the server IP address with the Brocade SMI agent using the credentials for the Brocade switches (all the same userID/password).
I hope this helps.
MikeDELL-Mike Mck
24 Posts
145
0
Posted March 22nd, 2012 14:00
Here is a great solution that walks you through the entire Brocade installation.
SOL66661
DELL-Mike Mck
24 Posts
145
0
Posted August 30th, 2010 23:00
What OS is the Navi Manager running on?
If you change anything in the accounts, you should retype the password.
For the Brocade, you can try this link:
www.brocade.com/.../53_1000813_02_installguide.pdf