‎How to upgrade nas code | DELL Technologies

Start a discussion

UNSOLVED

Tulabandula

updated

15 years ago

Tulabandula

4 Posts

0

1060

January 26th, 2012 14:00

How to upgrade nas code

Hello,

Am currently on 7.40 nas code on VNX 5300 unified. I wanted to upgrade to 7.50. How can i do it form CLI ? is there any steps i need to follow ?

R
Rainer_EMC
6 Operator
•
8645 Posts
247
0
Posted January 26th, 2012 15:00
Please use the GUI – UniSphere Service Manager

Its by far the easiest way.

It will download the code for you, perform the pre-upgrade health checks and do the actual upgrade.

Rainer
K
Kenneth_Hansen
7 Posts
247
0
Posted January 27th, 2012 00:00
Correct Rainer, but if the upgrade in on a system whit 2 Control Stations, the you can't use USM on that revision, this was first fixed in release 7.0.50-2, there is a Primus describing this.

Anohter thing, remebber to upgrade the OE for File first and the the required OE for block afterwards

Kenneth
C
Clustor
57 Posts
247
0
Posted January 30th, 2012 13:00
I thought systems with 2 control stations have a upgrade procedure which had to be performed by EMC support prior version 7.0.50-2.

If it's a procedure that's generally available however, i'd like to learn how to do that as well.