Solved!
Go to SolutionS
ServerMonkey1
5 Posts
0
1936
January 5th, 2016 14:00
XML API & VNX Arrays
I have a number of VNX based storage arrays and I'm looking to interact with them programmatically, they are all VNX 5100, 5300 and 5500 units running in block storage mode.
Does anyone know if the XML API or other API can be used with these units, given we don't have unified storage and control station I'm not sure what the options are, if any.
Rainer_EMC
6 Operator
•
8645 Posts
1169
1
Posted January 12th, 2016 10:00
correct - the XML API is only available if you have a file or unified model.
Theoretically you could use the SMI-S block API - however that needs an external SMI-S provider to be installed and most likely is too much work unless you are already familiar with SMI-S programming.
your best choice is the VNX block CLI
If you want just reporting it could make sense to go though UniSphere Central.
That should support a REST API in the future.
Rainer
kelleg
6 Operator
•
4537 Posts
1169
0
Posted January 6th, 2016 13:00
You can use the Command Line Interface (CLI) to control/query the Block-only array.
https://support.emc.com/docu41553_VNX_Command_Line_Interface_Reference_for_Block.pdf?language=en_US&language=en_US
glen