UNSOLVED
Closed
J
jfrentheway
1 Rookie
•
3 Posts
0
823
April 4th, 2023 13:00
VxRail expansion with 6 uplinks for VDS
I'm trying to expand a cluster with two new nodes. The existing cluster's nodes each have 6 x 10G uplinks. I've got 6 x 10G uplinks on the new nodes as well.
When I validate in the "Add nodes" wizard, I'm getting a message of
"The size of the nic_mappings should be either 2 or 4 for each VDS"
I'm thinking that the system wants only 4 uplinks? Should I remove 2 uplinks on the existing nodes and new nodes? The system has been running well for a couple of years - I hate to mess with it.
Thanks for any advice.
jfrentheway
1 Rookie
•
3 Posts
574
0
Posted April 5th, 2023 06:00
Currently on 7.03.370. No LAGs, all vanilla.
DELL-Sam L
Community Manager
•
8058 Posts
•
34386 Points
574
0
Posted April 5th, 2023 08:00
Hello jfrentheway,
You will need to open a support case so that we can resolve this issue for you.
jfrentheway
1 Rookie
•
3 Posts
573
0
Posted April 5th, 2023 08:00
I was afraid of that. I have to wait for the guy with the support access to get back from vacation.
Thanks though!
Dell-DylanJ
6 Operator
•
2924 Posts
474
0
Posted April 13th, 2023 08:00
Heya,
I'd recommend checking out the VxRail Network Planning Guide. It's pretty in-depth when it comes to network requirements and you may find it pretty helpful for this question.
https://www.delltechnologies.com/asset/en-ae/products/converged-infrastructure/technical-support/h15300-vxrail-network-guide.pdf
DELL-Sam L
Community Manager
•
8058 Posts
•
34386 Points
577
0
Posted April 5th, 2023 05:00
Hello jfrentheway,
What is your current VxRail cluster version? Do you have a LAG that is configured on your vDS?