UNSOLVED

bgoggles

updated

20 years ago

B

bgoggles

40 Posts

0

12998

July 14th, 2006 04:00

Cant install Win XP Pro

I have reformated my Inspiron 8000 at least 5 times. 4 of those I installed Win XP. The mother board blew in my inspiron and my employer was generous enough to give me a free computer. I am trying to install my Win XP. Everything seems to go like normal. However, after format I get a "fatal error" that reads:
 
An error has been encountered that prevents Setup from continuing.
 
One of the components that windows needs to continue setup could not be installed.
 
Data error (cyclic redundancy check).
 
If you are installing from a CD, there might be a problem with the disc; try cleaning the disc or using another disc.
 
If you are installing from the network, it is possible that not all of the files were copied correctly to your disk drive. Run the disk checking utility on your installation drive from the Recovery Console and start setup again.
 
I dont understand why XP will not install. Can any one help?
  • 1024

    0

    Posted July 14th, 2006 13:00

    is this the full version or upgrade version? when you reformat, did you have it check disk for errors? this xpp disk is it the first time use or, has been used several times on other computers? visually check that disk does not have any scratches, smudges, that will prevent a correct reading by the cdrom.
  • bgoggles

    40 Posts

    1024

    0

    Posted July 14th, 2006 15:00

    It is the store bought full version. Ive had the cd for a year and used it once. It has been kept in good condition and does not have any scratches.
  • mombodog

    2 Intern

    •

    12735 Posts

    1024

    0

    Posted July 14th, 2006 16:00

    CDC error usually means you have a bad disc, even if there are no scratches, it's just a bad disc, you could try replacing the cd drive just in case it is a hardware malfunction.
  • 1024

    0

    Posted July 14th, 2006 18:00

    It happened to me too, very frustrating. I replaced the older hard drive and reinstaled windows no problems.
  • bgoggles

    40 Posts

    1024

    0

    Posted July 14th, 2006 18:00

    You replaced the hard drive to get yours to work?
  • 1024

    0

    Posted July 17th, 2006 17:00

    I have two hard drives. I erased both (formatted, not quick format). Then I used the newest of them (2004 bought HD) and installed there. No problems with my first install (Windows XP pro SP1), which I could not get in my older drive. I had to download the SP2 and copy it to a CD (from the SP2 download for IT professionals microsoft site); because installing it directly form the internet would not work. So, after 9 tries and waiting every single one of them I am up and running again.

    Hope this helps.