Solved!
Go to SolutionDell Command Update 3.1.2 hangs with "Operation in progress".
DCU has worked very well on this system for several years, and the current version (3.1.2) has worked well for some months. Suddenly it has started hanging with the mesages
- "Operation in progress"
- "Warning: An operation is currently in progress. Please wait until it completes."
- "Operation is 10 % completed..."
I have tried disabling the antivirus software, running DCU with admin privilegies and running the system in safe mode (then DCU did not start at all). I have also tried reinstalling and donwgrading to previous 3.x versions. Nothing helps. Any suggestions on how to fix this?
15538
1
Posted November 11th, 2020 04:00
Dell released Dell Update 4.0 today. Problem resolved!
18917
1
Posted August 25th, 2020 10:00
Any solutions? I have the same issue.
18895
0
Posted August 25th, 2020 12:00
Also having this issue.
18684
0
Posted August 27th, 2020 20:00
Any solutions? I have the same issue.
18547
0
Posted August 29th, 2020 10:00
I'm having the same issue with version 3.1.3 of Dell Command | Update. Very annoying.
18536
0
Posted August 29th, 2020 15:00
same here with 3.1.3 but mine says "Operation is 100 % completed".
18489
0
Posted August 30th, 2020 07:00
Same problem I have with Dell Command Update version 3.1.3
18477
0
Posted August 30th, 2020 09:00
Same problem for me but with the Version 3.1.3. I hope that DELL will will do something about it.
18265
0
Posted September 1st, 2020 00:00
Would be nice with some sort of reaction from Dell - this application used to work fine for several years.
EDIT: I'm seeing the same in 3.1.3
blazius1
1 Rookie
•
11 Posts
12378
0
Posted November 11th, 2020 04:00
Thanks, @AlSaff ! Dell Command | Update 4.0 can be downloaded from https://www.dell.com/support/home/en-us/drivers/driversdetails?driverid=pf5gj&oscode=wt64a&lwp=rt