I installed Windows XP professional this evening. I did a new installation instead of an upgrade because my internet explorer crashed and needed to fix that. Now, when I go to My Computer, I see my hard drive but it shows an image of a page with a desktop image. When I double click on Local Disk I get this message: Please go to the Control Panel to install and configure system components.
I've never heard of anything like that happening but one thing does come to mind when I read your post. You said you did a fresh install which in turn wipes out all your device drivers. Did you go into your control panel and make sure that there are no yellow dots with question marks in them? If you have any of those, that means your computer doesn't have a driver installed for that device. Your description of your problem makes me think you haven't installed your chipset drivers. If you have a yellow dot called "SM Bus Controller", that's what it is and your drives may be affected. I could be totaly off base but that's what I'd try.
Press Windows+Break(Pause) keys together , select "Hardware" tab , "Device Manager" & check for any Yellow circles.
If found double click on it to show further info.
You said you did a New Installation was this from within Windows , ie: Upgrade XP CD inserted with Windows already started , select Install > New Installation.? If so its not recommended. You should do a Clean Install from boot of Upgrade XP CD. ---------------- Use the below links for info on a Clean Install then install Drivers from CD with Windows XP started , just insert Driver CD.
I have shown Supersite & Elder Geek links last as they assumes Clean Install status so doesn't include step to delete existing partition & so achieve Clean Install status. (Clean Install status , ie: no Windows OS installed on HD).
Use this link & select XP Home or PRO then method , ie: Used Hard Drive , Multi_Page has text & large pictures of Clean Install. http://www.windowsreinstall.com/
Clean Install deletes existing partition (like FDISK) & Formats HD during Install of Windows XP from XP CD. Set BIOS to use CD-ROM as 1st boot device usually by pressing "F2" key during boot (startup), for some Computers press "Del" key Re-start Computer & when message "Press any key to boot from CD" shows do it & let subsequent messages "Press any key...." time out to Windows setup.
I got it fixed now. I double clicked on the image and it began to install my new display drivers that I had downloaded (and thought i had installed) last night.
This may not be related to your problem, but if you have the drives listed in Windows Exploer, can you make a short cut on the desktop, and does that work?
Reason for asking is that there was a problem on some PCs that drive shortcuts on the desktop did not wotk and a hotfix was made available on request. I had to get that and it solved the desktop shortcut problem
To see the file extensions, tools, folder oprtions, view tab, clear 'hide extension for known file types'. That way you can be sure whether it is an .inf file
corrected typo
Message Edited by JRosenfeld on 04-06-2004 07:09 PM
There is an autorun file in the c drive, but it doesn't have the .inf at the end. So, I am not sure if it is the right file. What does this file do?
~~~~~~~~
I did do the new install in windows. However, it did ask about the partition and took care of that. So, when you look at the disk management, there is only partition. I don't want to have to do a clean wipe unless I just absolutely have to.
alevasseur14
2 Intern
•
593 Posts
471
0
Posted April 5th, 2004 17:00
I've never heard of anything like that happening but one thing does come to mind when I read your post. You said you did a fresh install which in turn wipes out all your device drivers. Did you go into your control panel and make sure that there are no yellow dots with question marks in them? If you have any of those, that means your computer doesn't have a driver installed for that device. Your description of your problem makes me think you haven't installed your chipset drivers. If you have a yellow dot called "SM Bus Controller", that's what it is and your drives may be affected. I could be totaly off base but that's what I'd try.