lcsm

updated

15 years ago

L

lcsm

5 Posts

0

1657

July 20th, 2011 20:00

Nooriginal setup CD's

I have a DIM 8400 purchased in 2005.

The system will not boot up. Error message “Windows could not start because the following file is missing or corrupt \windows\system32\config\system.”

Everything was fine until I allowed an MS  update. The next day, it would not boot.

The system came with no set of CD’s. Is it possible to get CD’s to repair?

  • fireberd

    11 Legend

    •

    33399 Posts

    •

    112848 Points

    380

    1

    Posted July 21st, 2011 04:00

    Dell has a procedure to get a set of "backup" discs.  For US customers  Click Me       For other countries, contact Dell for your area.

    Inspiron 16 5630 Laptop and WD22TB4 Docking Station
    Self-built desktop for recording studio application
  • lcsm

    5 Posts

    380

    0

    Posted July 21st, 2011 06:00

    THANK YOU - THANK YOU. I searched their website for an hour and couldn't find it.  

  • fireberd

    11 Legend

    •

    33399 Posts

    •

    112848 Points

    380

    0

    Posted July 21st, 2011 06:00

    Great, glad I could help.

    Inspiron 16 5630 Laptop and WD22TB4 Docking Station
    Self-built desktop for recording studio application
  • lcsm

    5 Posts

    380

    0

    Posted July 25th, 2011 18:00

    I received the CD today from Dell. I have unplugged all non essentials, stuck the CD into the drive, and it won't reboot. I just get the same message. Very discouraging.

  • theflash1932

    11 Legend

    •

    16255 Posts

    380

    0

    Posted July 25th, 2011 20:00

    What do you mean "it won't reboot"?  

    If it won't boot to the CD, make sure BIOS is set to boot from the CDROM ... or press F12 and specify the CD/DVD drive as the the boot device.

  • RobinBredin

    6 Operator

    •

    3717 Posts

    380

    0

    Posted July 26th, 2011 02:00

    I received the CD today from Dell. I have unplugged all non essentials, stuck the CD into the drive, and it won't reboot. I just get the same message. Very discouraging.

     

    Did you press F12 when you see the dell flash at post, to boot off your DVD, see HERE.

  • lcsm

    5 Posts

    380

    0

    Posted July 26th, 2011 06:00

    Yes I did press F12

    . I have 3 options

    1-"Onboard or USB Floppy drive

    2-"Onboard or USB CD- Rom drive

    3- Onboard SATA Hard drive

    I highlited 2" and hit enter.  Then message "selected boot device not available" appears.

    I then went to "system setup", - Boot sequence.

    I put "onboard or USB CD-Rom at the top of the list.

    I then checked "drives". I have 2 cd drives. One is shown has "Drive 4: PATA-0, the other is Drive 5:PATA1.

    Both devises are "on". I have tried starting up with the disc in both drives and get the same message.

    I know just enough about OS to be dangerous, put everything I see tells me that it should be detecting that CD and booting up.(sigh).

  • theflash1932

    11 Legend

    •

    16255 Posts

    380

    0

    Posted July 26th, 2011 07:00

    Do you have another bootable CD there that you can try?  If not, you can download one of any number of utilities from the Internet - Ubuntu or UBCD ... this is to test your drive(s?) to make sure they are working properly.  You might also try booting to your new XP CD on another PC, to make sure the CD is good.  This is an actual Dell XP Reinstallation disk, correct (not a "resource"/driver CD)?

  • lcsm

    5 Posts

    380

    0

    Posted July 26th, 2011 07:00

    "Reinstallation CD -Recovery Media for Microsoft Windows XP Home - Service Pack 3"