Solved!
Go to SolutionR
RobinBredin
6 Operator
•
3717 Posts
0
2657
February 1st, 2009 09:00
Reinstall problem
Hi, I have just used the F8 to do a factory reinstall. However, i have vista Home Premium, and my desktop is showing Vista Basic. Also when I try to install my ATI software, im getting two error messages, and the software fails to install. The first error says,
Could not load file or assembly 'CLI.Impletmention, version+ 20. 3167, 36903, culture= neutral, PublickeyToken= 90ba9c70f8462e' or one of its dependencies. the system cannot find the fiole specified.
The other error message says,
Could not load file or assembly 'MOM.Impletmention, version+ 20. 3167, 36903, culture= neutral, PublickeyToken= 90ba9c70f8462e' or one of its dependencies. the system cannot find the fiole specified.
any help thanks.
584
0
Posted February 1st, 2009 12:00
did you install the netframework software from MS? ATI normally needs the .netframwork to install properly.
Not sure about the vista issue what does your reinstall disk say for version? This is the Dell info on Factory restore using Vista
584
0
Posted February 1st, 2009 14:00
Hi Dave50, MS did download the .net framework 3.5 with SP1. However, I did try to install the 2.0, but it wold not let me because I had the 3.5. So I booted into SAFE MODE, and tryed it that way, the ATI software said that the detection driver was not loaded, so it would not install. The good news I did get the driver on, by going through Device Manager. I did an repair on the Vista Home Premium and got that to work.
584
0
Posted February 4th, 2009 04:00
do not worry ; have the resolution here
get in ctrl panel >programs and features.
uninstall ati
use the resurce cd install it ; update it from support.del.com.
reboot the computer.
if still any issue let me know it .
bye
584
0
Posted February 4th, 2009 06:00
do not worry...
Robin won't be worried at all - given that he mentions he's already fixed the problem... in the post directly above yours :emotion-55:
But I doubt your driver-based "solution" would've worked anyway, since the 'fix' which worked, involved removing the new card, temporarily refitting the old card, uninstalling the ATI software, then fitting the new card again, before reinstalling the graphics drivers?
RobinBredin
6 Operator
•
3717 Posts
584
1
Posted February 4th, 2009 03:00
Hi, Finally got it sorted. What I had to do, was to take out my 4550 graphics card, and then install the graphics card that came with the system. Then I did another Factory Restore, after that I deleated the old ATI software, which included the driver, and then reinstalled the 4550 graphics card, and loaded the software. Just as well I kept my old graphics card.