UNSOLVED

wotcha

updated

20 years ago

W

wotcha

13 Posts

0

14313

January 6th, 2007 10:00

Reinstallation CD - Windows XP

I have a problem with my Dimension 4600 - it gets as far as the Windows blue welcome screen and freezes. So I guess I need to reinstall some or all of the OS - however I don't want to lose all my user folders, files, Documents & Settings etc. Will the supplied reinstallation CD allow me to just fix the OS without overwriting/deleting these other files?
 
Thanks
  • BigBrother

    2 Intern

    •

    4801 Posts

    339

    0

    Posted January 6th, 2007 11:00

    wotcha,
     
    You can do a "repair installation" of Windows using the Dell Reinstallation CD.  It is important to note that, depending on the particular problem your system is experiencing, a "repair installation" may not work and could possibly cause the loss of data on your hard drive.  If it is at all possible to back up your important information, either from Safe Mode or by another means, do this before attempting a repair of Windows. 
     
    Can you post the exact error message that your system is displaying on the Blue Screen Of Death?
     
    Steve
  • wotcha

    13 Posts

    339

    0

    Posted January 6th, 2007 12:00

    Steve
     
    Thanks for the reply - I'm not getting any error messages it just gets as far as the screen with dark blue borders (top & bottom) and light blue centre with the Window's logo and there it just hangs.
     
    I've tried all the boot options like Safe Mode, Last complete load etc. and all end up at the same place. I've also tried a few tools like ultimatebootcd and PCBeginner - no good.
     
    I just need a way of getting into the system to recover some of my user files then I'd be happy to rebuild the system - I had read that it could be possible to use the Windows CD to do some kind of repair or install without touching the user files.
     
    Paul
     
     
  • rickmktg

    2 Intern

    •

    11898 Posts

    339

    0

    Posted January 6th, 2007 13:00



    wotcha wrote:
    I've done an F12 and Option 6 IDE Drive Diagnostics - the Primary IDE drive returned Pass and I've got no other drives so no errors reported. Are there other diagnostics I should try?
     
    Paul

    You could run the Extended test on the drive just to make sure.
  • rickmktg

    2 Intern

    •

    11898 Posts

    339

    0

    Posted January 6th, 2007 13:00



    wotcha wrote:
    I have a problem with my Dimension 4600 - it gets as far as the Windows blue welcome screen and freezes. So I guess I need to reinstall some or all of the OS - however I don't want to lose all my user folders, files, Documents & Settings etc. Will the supplied reinstallation CD allow me to just fix the OS without overwriting/deleting these other files?
     
    Thanks

    How did you determine that it's a software problem and not a hardware problem?
     
    You should reboot, hit F12, and run diagnostics.
  • wotcha

    13 Posts

    339

    0

    Posted January 6th, 2007 13:00

    I've done an F12 and Option 6 IDE Drive Diagnostics - the Primary IDE drive returned Pass and I've got no other drives so no errors reported. Are there other diagnostics I should try?
     
    Paul
  • wotcha

    13 Posts

    339

    0

    Posted January 6th, 2007 14:00

    How do I do an Extended test - can't see that option on F12 menu?
     
    Thanks
     
    Paul
  • wotcha

    13 Posts

    339

    0

    Posted January 7th, 2007 13:00

    Well I've moved on - I used the Recovery console to create a new Registry from the Repair folder (I suspected the Registry might be corrupt due to a virus) - this now means I get past the Welcome to Windows page and into my desktop. But the user is shown as Owner (not one of mine) and my mouse and keyboard don't work.
     
    Any suggestions?
     
    Paul