UNSOLVED

sweetwater

updated

23 years ago

S

sweetwater

1 Rookie

•

17 Posts

0

1778

May 15th, 2004 19:00

Restore problem and safe mode question

First with restore, every time I try to restore my computer, it goes half way then shuts down and says it was unsuccessful.  I've tried every restore date I have but all do the same thing.  Last time it was working the power went out during restore and shut off before it was finished and since then it hasn't worked. 

In Safe Mode in the system on performance I've noticed that the performance status is in ms dos compatability on both drives a and c but it runs in a 32 bit on normal mode.  Is that the way it should be?  If not how do I fix it in safe mode?  Thanks in advance.

  • osprey4

    6 Operator

    •

    34230 Posts

    173

    0

    Posted May 17th, 2004 10:00

    Second question first, yes, this is normal for safe mode, since only minimal drivers are loaded.

    First question, try turning Restore off then back on:
    To disable, click Start > Settings > Control Panel.
    Double-click the System icon.
    On the Performance tab click File System.
    Click the Troubleshooting tab, and then check Disable System Restore.
    Click OK. Click Yes, when you are prompted to restart Windows.
    To re-enable, follow the same steps but uncheck the "Disable System Restore" box.
  • sweetwater

    1 Rookie

    •

    17 Posts

    173

    0

    Posted May 17th, 2004 16:00

    I have a Dell Dimension L866r and I tried what you said and it didn't work.
  • osprey4

    6 Operator

    •

    34230 Posts

    173

    0

    Posted May 17th, 2004 22:00

    Try running Restore from a command prompt as described HERE.

    If that does not work, you may have a bigger problem than just restore.
  • sweetwater

    1 Rookie

    •

    17 Posts

    173

    0

    Posted May 18th, 2004 15:00

    Thanks that worked.