I have a inspiron 530s destop. It runs fine but is getting slow and cluttered. I have done many many freah installs of xp on other computers, but this will be my first install on a computer with a sata harddrive. will it work like my other computers or will I need to use the sata drivers in the install process or is that just needed for brand new hard drives? Also on my other computers I always delete the hidden dell restore partitions for extra hard drive space. Any reason why I should not delete that partition on this newer system?
If you just have one SATA hard drive and not a "RAID" type configuration there is nothing special you need to install, just boot from the Operating System disc. But, you should consider using the Dell recovery partion to restore as it restores everything to the original factory condtion and no discs are needed. With a manual install there is a specific install sequence that must be done to have a successful install (1) Install Windows (2) Install Dell Desktop System Software (3) Install motherboard chipset drivers (4) install device drivers including video, DELL Sound Drivers (do not use non Dell sound drivers), ethernet, etc.
On deleting, the Dell recovery partition, if you are that desperate for extra hard drive space, it's time to upgrade the hard drive. The space you will gain is relatively very small. However, if you are going to install an OS other than what it was delivered with then the recovery partition can no longer be used and you can recover the small partition. Leave the Dell hardware diagnostic partition alone as you may need that.
Inspiron 16 5630 Laptop and WD22TB4 Docking Station
Self-built desktop for recording studio application
Thank you for the reply. Mainly I want to use the manual install method to get rid of all the stuff Dell puts on the computer. I just want a fresh copy of Windows XP with the Necessary drivers. Then I can choose what Antivirus and other programs that I want to put on my computer. I love Dell. There computers run forever and they are good quality. But I don't want Mcafee or Norton and all of these updaters and whatever else they want to put on there. I like to maintain my computer manually. And I have my own Antivirus scanner choice. I would like to install WinXP without having to uninstall Mcafee or Norton and leave a mess in my registry and hard drive.
I only have one sata hard drive in this system. So I assume raid is not an issue. I have never messed with a raid configuration. I believe that requires 2 hard drives?
You mention Dell Desktop System Software? What is that exactly? I looked for it on the Drivers and Downloads page of the Dell Support website and could not find it. The closest I found was a Dell Support Center Application Version:GM build patch 3.3-2.2.8335 (with PCC4780), A11. It was labeled as recommended and not urgent. Not sure what it is but I don't want it if it is not necessary. I found a list that gives an order in which to install all the drivers and it says to install Dell Desktop System Software first. It says to look under System and Configuration Utilities Category on the Drivers and Downloads page but I don't have a System and Configuration Utilities Category on my Drivers and Downloads page. Maybe it is only necessary for Vista or Win7? I have Win XP. And this is the older discontinued model Inspiron 530s. Maybe it is not required for the 530s? I will leave the Dell Partitions in place in case I screw up.
There is no Desktop System Software listed for the 530S so you won't have that. It's only on applicable models. But, don't skip the Intel motherbord chipset drivers. They MUST be installed BEFORE installing Device Drivers. The chipset drivers are key to a successful install.
Inspiron 16 5630 Laptop and WD22TB4 Docking Station
Self-built desktop for recording studio application
OK Thank you for your help Firebird :) I have one last question. Another reason I wanted to manuall install is because I wanted to partition my drive to keep music, pictures, ect on a separate partition. Now if I were to have trouble and decided just to do a restore from the Dell partition. Is there an option during the restore process to partition the drive? Like when doing a regular install? Thanks for your time. Bill
Hmm, XP did not come with native sata support so you may have issues installing on a sata drive.
What is required is to put all the files of the Rapid Storage Technology Driver on a floppy and during the install use the prompt to press F6 to install the raid/scsi driver pointling to the floppy drive as the source.
Ok so here is an update. I have tried the f6 floppy during windows install. Windows says that it already has drivers but I can install the drivers from the disk if I choose. I tried installing the sata from the floppy and got a bsod. I tried it several times same thing. So I went ahead with the windows sata driver option and it installed fine. Windows installed fine. I found on the Resource CD the Destop System Software. I installed it. I install the chipset drivers. Everything is fine. Then I get to the next item on my list Intel Matrix Storage Manager. I get an error "The Computer does not meet the minimum Requirements for installing this software setup will exit" Can anyone recommend what I need to do next. Or what I am doing wrong. Thanks in advance for your time and input. Bill
First Thank You to everyone who has helped out. Especially you Bacillus:)
Ok I have figured out my problem. Somehow the bios had switched to ide. I changed the bios to sata and it accepted the f6 floppy on a reinstall. All of the drivers have installed except one Intel G31/G33/Q33/Q35 Graphics Controller. It is listed as an urgent driver in the Dell Support Drivers Page for my Service Tag. It says "my computer does not meet the minimum requirements to install". In Device Manager I have one error for a missing driver "PCI Simple Communications Controller". Is that related to the Graphics Controller and what am I missing to get the Graphics Controller to install? Do I need net framework maybe?
Thank You all for the valuable input. Much appreciated.
fireberd
11 Legend
•
33399 Posts
•
112848 Points
704
0
Posted November 26th, 2010 03:00
If you just have one SATA hard drive and not a "RAID" type configuration there is nothing special you need to install, just boot from the Operating System disc. But, you should consider using the Dell recovery partion to restore as it restores everything to the original factory condtion and no discs are needed. With a manual install there is a specific install sequence that must be done to have a successful install (1) Install Windows (2) Install Dell Desktop System Software (3) Install motherboard chipset drivers (4) install device drivers including video, DELL Sound Drivers (do not use non Dell sound drivers), ethernet, etc.
On deleting, the Dell recovery partition, if you are that desperate for extra hard drive space, it's time to upgrade the hard drive. The space you will gain is relatively very small. However, if you are going to install an OS other than what it was delivered with then the recovery partition can no longer be used and you can recover the small partition. Leave the Dell hardware diagnostic partition alone as you may need that.