UNSOLVED

wildcat74

updated

21 years ago

W

wildcat74

7 Posts

0

39457

January 17th, 2006 17:00

System32\DRIVERS\pci.sys

I have a Latitude 600.  I am getting a message that I have a corrupt file - System32\DRIVERS\pci.sys.
 
It says to insert the setup disk and press "r" to try and repair.  I am not sure which disk this is.  I have inserted the "drivers and utilities" disk,, but nothing is coming up.  I have also tried the XP reinstallation disk, with no results.  Has anyone seen this problem and know what to do about it?  I don't want to lose the info on my hard drive.  I can't get past this screen.
 
Am I missing a disk that I should have?  Thanks!
  • Denny Denham

    2 Intern

    •

    18798 Posts

    3135

    0

    Posted January 17th, 2006 19:00

    wildcat74,

    To enter Recovery Console (which is where you need to be to correct the problem) see the procedure here. You must boot with the XP Reinstallation disk, see this.

    Once you are in Recovery Console at the command prompt enter the following (substituting the letter of your CD-ROM drive for X:

    expand x:\i386\pci.sy_ c:\Windows\system32\drivers and click .

  • wildcat74

    7 Posts

    3135

    0

    Posted January 18th, 2006 03:00

    Thanks.  I will try this tomorrow. I am having trouble with the CD Rom drive.  Hopefully, I can't get it to work tomorrow.  I will let you know!
  • wildcat74

    7 Posts

    3135

    0

    Posted January 18th, 2006 18:00

    Denny:

    I was able to boot with a different CD Rpm drive.  I followed your instruction and got the following response:  Unable to create file pci.sys.

    In addition, if I issue a DIR command, it says "An error occurred during directory enumeration"

    Is there another way to recover pci.sys?  Thanks!

    wildcat74

     

     

     

  • Denny Denham

    2 Intern

    •

    18798 Posts

    3141

    0

    Posted January 18th, 2006 19:00

    wildcat74,

    Run diagnostics on your hard drive. It sounds as though it is failing.

  • mattholluk

    1 Message

    3141

    0

    Posted January 19th, 2006 20:00

    Hello

    I am having the same problems too.

    When I type in the expand command it just says "Access is Denied"

    Not sure how to gain access.

    Thanks in advance

  • wildcat74

    7 Posts

    3141

    0

    Posted January 23rd, 2006 00:00

    I ran the diagnostics with no errors.  I tried your instructions again using D as the cd rom drive that is holding the start-up disk and I get the message "The system cannot find the file or directory specified".
     
    Any other suggestions or am I doing something wrong? 
     
    I can simply try and restart the computer, but I don't want  to lose all of my files and programs.  Any way to salvage?
     
    Thanks in advance!
  • wildcat74

    7 Posts

    3141

    0

    Posted January 24th, 2006 19:00

    I just got assistance from DELL and my system is back up and running.  Boot from your original set-up disk and press "r" for repair when you get to the first screen (I think there are 3 choices at this screen.  Then choose 1 for the installation to repair.  When you get to the C: windows prompt, type "chkdsk".  This goes through and repairs files.  It worked for me.  When this is done..about 1 hour, try and reboot from the hard drive.

    If this does not work, she gave me one more option.  Let me know.

     

    wildcat74

  • 3141

    0

    Posted January 26th, 2006 03:00

    I have the same error on a dimension 8400 after doing a select startup in msconfig, and removing Microsoft office 2003. Computer will not boot and get the error you did. I tried want Dell told you and did the chkdsk /p option. Is that what you did?

    Jim
  • 3141

    0

    Posted January 26th, 2006 04:00

    So far the test is at 1% complete for about 10 minutes. Maybe it is hung. I also booted to the utility partition, previously, and ran the express test. It was getting message errors on the SATA Drive. It said it was an unrecoverable error or it was write protected. There were many errrors, so I canceled the test. Does anyone know if that is a non-destructive test?. I assumed it was. Maybe the drive is shot.

    The problem was that the computer was very very slow, and would hardly do anything when the mouse was clicked on things. Installed the free Grisoft AVG virus protection software as the McAfee was expired. The scan did not find a virus.
  • wildcat74

    7 Posts

    461

    0

    Posted January 26th, 2006 14:00

    It sounds like your problem may be different than mine.  I don't recall whether I had a /p after the chkdsk or not.  I did it as I spoke with her and did not write it down.  She gave me one more possible thing to try if the chkdsk did not work.  I have my notes at home and I will post them to you tonight when I get home.