UNSOLVED

Kasey6465

updated

23 years ago

K

Kasey6465

26 Posts

0

11302

May 4th, 2004 17:00

Task Scheduler Doesn't Work

I recently purchased a Dell Dimension 4600 with Windows XP Home.  I have just found out that the task scheduler is not working.  I originally blamed my anti-virus program and contacted Symantec.  They put me through several "fixes" and finally suggested I test the scheduler itself.  I added the calculator to the task list and set it to run each time I turned on the computer.  I shut down the computer and restarted and nothing happened. 

Would some one please tell me what I can do to fix this problem.  I did contact Dell, but the tech rep was not able to solve the problem.  Please help.  Thanks    

  • SidBord

    2 Intern

    •

    261 Posts

    983

    0

    Posted May 4th, 2004 17:00

    You aren't beiong specific about "it doesn't work". Do you see any diagnostic message over on the right side. I was having problems initially because it refused to execute without a password. I got a fix for that from Kelleys-Korner, and now the scheduler works fine. That might not be your problem, but you need to give us more details about what happens.
  • Kasey6465

    26 Posts

    983

    0

    Posted May 4th, 2004 18:00

    I do not receive any messages regarding anything.  Nothing different is happening, the only reason I do not think it is working is that I have scheduled several tasks and nothing seems to run on schedule.  I also do not think a password  is the problem, because I am the only one using the computer and do not have any passwords set up anywhere.  I do not know what more I can add.  Tell me what I can do to further check it out.

  • jwatt

    4446 Posts

    988

    0

    Posted May 4th, 2004 19:00

    Kasey,

    See  this Microsoft article.

    Jim
  • gryjhnhpe

    2 Intern

    •

    1956 Posts

    988

    0

    Posted May 4th, 2004 21:00

    You were told in a previous "Reply" that the Task Scheduler normally needs a password to run Tasks.
    But you can get it to run without a Password by using Regedit

    (Needs  Windows SP1 installed.)
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
    limitblankpassworduse    DWORD    0
     
    or use Kelly's Korner vbs  script;
    http://www.kellys-korner-xp.com/regs_edits/sthome.vbs
    Just Authorize Script.
  • SidBord

    2 Intern

    •

    261 Posts

    988

    0

    Posted May 4th, 2004 21:00

    Passwords probably aren't the problem, but I also am the only one using my computer, and I also did not set up any passwords. That doesn't seem to matter.
  • tony811

    1 Message

    988

    0

    Posted May 8th, 2004 00:00

    I read the article that you noted. My problem is that the Run As box, which is blank, and password function are both disabled and can't be changed. Any ideas?
  • gryjhnhpe

    2 Intern

    •

    1956 Posts

    988

    0

    Posted May 8th, 2004 20:00

    Don't know reason why Password is disabled but if you use my above Reply info it should run without a Password in your account "User Accounts".

    Message Edited by gryjhnhpe on 05-09-2004 09:50 AM

  • hlk

    3 Posts

    988

    0

    Posted May 10th, 2004 20:00

    After spending hours searching the net for fixes to this problem , all I have managed to achieve is to establish that there a number of us out there with the same problem !  

    Is your task scheduler shown as  'starting' in the services window of administrative tools (in control panel) ?

    If you do manage to fix this please post here.  Meanwhile I'll keep looking.

    Cheers

      

  • gryjhnhpe

    2 Intern

    •

    1956 Posts

    988

    0

    Posted May 10th, 2004 22:00


    hlk wrote: ....Is your task scheduler shown as  'starting' in the services window of administrative tools (in control panel) ?

    I assume your Task Scheduler doesn't show at started.?
    So you could check "Task Scheduler" > Click "Advanced"  & should show "Stop using......." if its shows "Start using ....."   Click it.

    It should also show "Pause ......"   if it shows "Continue ........"  Click it.

    Message Edited by gryjhnhpe on 05-11-2004 11:03 AM

  • hlk

    3 Posts

    347

    0

    Posted May 11th, 2004 00:00

    in administrative tools / services :

    task scheduler definately shows as 'Starting'

    Events log is 'Started'

    Remote Procedure call(RPC) is 'Started'   (this is shown as a dependantr task for task Scheduler(TS)

    in Scheduled tasks / advanced tab

    Stop using  Task Scheduler is available but produces message 'unable to stop the service' - 'Pause task scheduler & AT service account' are both greyed out. I can view the log though!

    If I try and add a scheduled task i get the 0x80041315 message

    the most recent mesage in the TS log is :

    "Symantec NetDetect.job" (NDETECT.EXE)
     Finished 03/05/2004 09:37:00
     Result: The task completed with an exit code of (65).
    "Task Scheduler Service"
     Exited at 03/05/2004 11:45:03
    [ ***** Most recent entry is above this line ***** ]

    I've even tried to start the schtasks from a command line .. it doesn't seem to find the exe and the old at.exe returns a messgae 'the servoce has not been started'

    I've also got Norton Internet security running - all updates manual at the moment..

    last but not least .. I seem to have had a bad startup from about the same time. I always have to choose the start from last clean config..but it's there every time I reboot or switch on..

    PC = P4 / 3Ghz / 512 ram / 120 gig hd / XP SP1 / I have a wireless network and everything is bang uptodate with microsoft / symantec / netgear..

    Sorry so much info .. but if this rings any bells I might get my life back .. it's keeping me awake .. how sad is that!

    pps - this is second time I've tried to post this reply so if there are two please ignore one or other..

    many thanks.. 

     

     

    Message Edited by hlk on 05-11-2004 03:06 AM