UNSOLVED
T
tangerine11
1 Rookie
•
11 Posts
0
140247
March 19th, 2017 09:00
windows 10 stuck in automatic repair loop after updating
My computer, an XPS 8500 originally running Windows 7 but upgraded to Windows 10, is stuck in a diagnose/repair loop.
When the computer turns on, I see the Dell logo and I have the ability to press F2 or F12.
Then a black screen comes up with the Windows logo and spinning circle of dots and it says, "Preparing automatic repair".
Then "Diagnosing your PC".
Then "Repairing disk errors. This might take over an hour to complete."
Then the Dell logo and F2/F12 prompts again.
Then "Scanning and repairing drive (C:): 0% complete".
Then it starts over from the beginning.
-When I press F12 I have the option to run Dell's diagnostics on the hard drive which comes up with no errors or problems.
-I can't start in Safe Mode by holding down the shift key; it just pauses at the Dell logo screen until I let go, then it starts the auto repair sequence.
-I have a Windows 10 installation USB and I've tried using it to do a Startup Repair but that seems to be the same as the automatic repair my computer is already trying to do and it just keeps repeating what I typed above.
-Using the Windows 10 installation USB to access a command prompt, I tried the four boot rec commands I saw in other posts (fixmbr, fixboot, scanos and rebuildbcd); they all completed successfully but didn't help my problem.
-I have no restore points to go back to.
Before I do a complete reinstall, can anyone think of anything else I can try to get me into Windows long enough to copy off my back up files or at least some key files I can't do without? Should I try going back to the previous build? Or use System Image Recovery? I don't know what those two things mean and I'm really afraid of losing my data.
Thanks...
PS: I'm not sure if it matters at this point, but here's what was going on before all this happened. Windows 10 did an update that changed my power settings so that my hard drive would turn off after 20 minutes. It turned off three times and each time, when I turned the computer back on it went through an auto repair but then would eventually let me back into Windows. I changed the power setting back to "never shut off" and disabled the Windows password because I was afraid in the future I wouldn't remember it. I haven't been able to boot to Windows since.
127626
1
Posted March 20th, 2017 15:00
Thanks for replying. Those links weren't really helpful, though. Any other ideas?
127871
0
Posted March 21st, 2017 09:00
127872
0
Posted March 21st, 2017 09:00
' Or use System Image Recovery? I don't know what those two things mean and I'm really afraid of losing my data "
:emotion-2:
I'd suggest you use the System Image recovery. Please, keep in mind, a system image is a copy of the entire state of your computer system which you created before the problems occurred on the system. The only data you'll lose is after you created the system image. What type of device you use to create a system image backup? Flash drive, external drive or some type of backup software such as Acronis?
127870
0
Posted March 21st, 2017 23:00
I don't have a system image to use, no restore points, nothing. I don't know why, but I thought the system restore thing was automatic. Also, I know the XPSs aren't tested for Windows 10 compatibility but Microsoft was so dang insistent with their popups and notices telling me to upgrade and saying my computer passed their tests.
I wound up taking my PC to a Microsoft Store this morning and luckily they were able to back up my data before reinstalling Windows.
Thanks to both of you for trying to help. I appreciate it.
127870
0
Posted March 22nd, 2017 16:00
Glad you computer is fix now. Thanks for the update....:emotion-2:
127870
0
Posted September 26th, 2017 16:00
Hi,
I had the same problem - when I took my systems out of the box they booted into Windows just fine. After I activated software licenses and joined them to the Domain - It would no longer boot, just a gave me a continuous loop "Preparing Automatic Repair"! after many hours of trying to solve with Dell support, who did not help - I went into Setup and disabled Secure Boot - now the systems boot fine - what I don't know is what changed? we just joined it to the domain and bang - no more boot with secure boot enabled. Hmmm any ideas?
120950
0
Posted March 19th, 2018 17:00
Let It Finish Overnight
First of all, “Repairing disk errors” is triggered by automatic CHKDSK on booting. As we all know, CHKDSK indeed plays a good role in scanning and repairing disk problems. Plus, most of time, CHKDSK may take a pretty long time to finish, such as 4 hours or more. So, it’s advisable to leave your computer running overnight to let it finish. But, the next day when you wake up and check PC, if “Repairing disk errors” issue persists, you can move on to try the other means.
https://www.errorsolutions.tech/error/windows-10-repairing-disk-errors/
Solution 3. Replace the HDD and Install Windows111412
0
Posted June 20th, 2018 18:00
I have the exact same scenario and tried all that are written here with no luck :(
I am Not sure why Microsoft intentionally pushed OS update to make us handicapped!!
It was up and running as of yesterday and overnight push just put me under the water.
Any help on just a fix for the same issue without loosing any data ?
Thanks in advance
Ash
17559
0
Posted June 22nd, 2018 22:00
Finally, I got it up without loosing any data and back to my original state.....
How,
Just followed the steps and it worked for me!!
How to disable-signed-driver-enforcement?
Robert P (retired)
6 Operator
•
9396 Posts
127625
0
Posted March 20th, 2017 06:00
Hi therealjampony,
Thanks for posting.
Here is some information you may find helpful: http://dell.to/2ndFizV
Robert P (retired)