Hello . Im trying to install Windows 7 but installation gives me a message to load drivers because it cannot find any drives. I have downloaded the intel rapid drivers. The installation says that it is compatible but it still cant find any drives...can someone help me?
You will need to download the file and put it on a burnt cd or a usb flash drive and unzip it. You then can load the windows disk and when it calls for the driver browse to where the intel rapid file you unzipped and click on it to install. You can also try booting into the bios and switching to ATA instead of SATA. Save the changes and then boot to the Windows disk and install Windows. Once you have Windows installed load the drivers and check the bios to put it back to SATA .
Jesse L (retired)
10 Wizard
•
17898 Posts
•
69016 Points
3292
0
Posted September 18th, 2015 05:00
basilistsam,
You will need to download the file and put it on a burnt cd or a usb flash drive and unzip it. You then can load the windows disk and when it calls for the driver browse to where the intel rapid file you unzipped and click on it to install. You can also try booting into the bios and switching to ATA instead of SATA. Save the changes and then boot to the Windows disk and install Windows. Once you have Windows installed load the drivers and check the bios to put it back to SATA .
Jesse L (retired)