I'm starting to struggle with my 128GB SSD with the operating system. I don't want to replace it or the other 1TB HDD. I was thinking of going with a another SSD for my 3rd slot. Would this be compatible? Either the 500GB or the 1TB?
Hi @Tonyroncola it would help if you share what system you have. If the SSD + HDD drives are the original drives, your OS (C:) 128GB drive is probably a slow SATA. You should clone your OS (C:) to a fast NVMe drive of 1TB capacity. Go to Dell documentation and manuals for your system to find which PCIe interface is supported by the M.2 socket. If it says interface supports up to M.2 PCIe Gen3x4, then the M.2 2280 SSD in your link is suitable. You have not shared what you use your system for, so look at online reviews and get the NVMe drive that is a match to your user requirement, e.g. ultra fast gaming, etc. Check that the free cloning application also included with your new NVMe drive. There may also be a free diagnostic application that tells you the status of your drives and predicts the NVMe drive's lifespan.
[This user does not work for Dell and volunteers their free time. Please remember to say thank you by clicking on my thumb up icon.]
And if it's the OS drive that's filling up, you are probably better off replacing it with a larger capacity one, and using the 128 for storage -- you will keep filling up a 128G Windows drive unless you're very vigilant about installing new software (and even when you install it elsewhere, it will still install components into both the root Windows folder and elsewhere on that drive).
I would recommend getting 512Gb as I've got a 512Gb NVMe PCIe Gen 3 SSD with speeds up to 3,000Mbps and it only cost me $53 with a 5 year warranty and a Free disk cloning software.
*NOTE: I am NOT a Dell employee, But I am a Community Rockstar*
Quick Tip: If your laptop has voltage / charging issues, try shutting it down, unplugging power from laptop, hold power button down for 30 seconds to do a full reset!
Thats actually something that we needed in the first place to find out what SSD is inside the laptop already.
*NOTE: I am NOT a Dell employee, But I am a Community Rockstar*
Quick Tip: If your laptop has voltage / charging issues, try shutting it down, unplugging power from laptop, hold power button down for 30 seconds to do a full reset!
*NOTE: I am NOT a Dell employee, But I am a Community Rockstar*
Quick Tip: If your laptop has voltage / charging issues, try shutting it down, unplugging power from laptop, hold power button down for 30 seconds to do a full reset!
crimsom
9 Technologist
•
6114 Posts
1270
2
Posted October 15th, 2020 22:00
Hi @Tonyroncola it would help if you share what system you have. If the SSD + HDD drives are the original drives, your OS (C:) 128GB drive is probably a slow SATA. You should clone your OS (C:) to a fast NVMe drive of 1TB capacity. Go to Dell documentation and manuals for your system to find which PCIe interface is supported by the M.2 socket. If it says interface supports up to M.2 PCIe Gen3x4, then the M.2 2280 SSD in your link is suitable. You have not shared what you use your system for, so look at online reviews and get the NVMe drive that is a match to your user requirement, e.g. ultra fast gaming, etc. Check that the free cloning application also included with your new NVMe drive. There may also be a free diagnostic application that tells you the status of your drives and predicts the NVMe drive's lifespan.
[This user does not work for Dell and volunteers their free time. Please remember to say thank you by clicking on my thumb up icon.]