Solved!
Go to Solutionshow module
Mod Ports Module-Type Model Status
--- ----- ----------------------------------- ------------------ ----------
1 24 1/2/4 Gbps FC Module DS-X9124 ok
2 24 1/2/4 Gbps FC Module DS-X9124 ok
3 24 1/2/4 Gbps FC Module DS-X9124 ok
4 24 1/2/4/8 Gbps FC Module DS-X9224-96K9 ok
5 0 Supervisor/Fabric-2 DS-X9530-SF2-K9 active *
6 0 Supervisor/Fabric-2 DS-X9530-SF2-K9 ha-standby
7 22 4x1GE IPS, 18x1/2/4Gbps FC Module DS-X9304-18K9 ok
Mod Sw Hw World-Wide-Name(s) (WWN)
--- -------------- ------ --------------------------------------------------
1 5.2(6a) 1.7 20:01:00:0d:ec:a0:ba:c0 to 20:18:00:0d:ec:a0:ba:c0
2 5.2(6a) 1.7 20:41:00:0d:ec:a0:ba:c0 to 20:58:00:0d:ec:a0:ba:c0
3 5.2(6a) 1.7 20:81:00:0d:ec:a0:ba:c0 to 20:98:00:0d:ec:a0:ba:c0
4 5.2(6a) 1.6 20:c1:00:0d:ec:a0:ba:c0 to 20:d8:00:0d:ec:a0:ba:c0
5 5.2(6a) 1.6 --
6 5.2(6a) 1.6 --
7 5.2(6a) 1.4 21:81:00:0d:ec:a0:ba:c0 to 21:92:00:0d:ec:a0:ba:c0
Mod MAC-Address(es) Serial-Num
--- -------------------------------------- ----------
1 00-13-80-a8-c9-78 to 00-13-80-a8-c9-7c
2 00-13-80-a8-ca-8c to 00-13-80-a8-ca-90
3 00-13-80-a8-c9-0c to 00-13-80-a8-c9-10
4 c8-4c-75-b1-28-54 to c8-4c-75-b1-28-58
5 00-19-e7-a8-4d-c8 to 00-19-e7-a8-4d-cc
6 00-19-e7-a8-4d-9c to 00-19-e7-a8-4d-a0
7 00-23-eb-4f-0d-20 to 00-23-eb-4f-0d-28
dynamox
11 Legend
•
20419 Posts
•
87439 Points
563
0
Posted April 7th, 2015 13:00
should be fine then, take switch backup, ground yourself to the switch itself and gently slide the blade inside
. It will take a couple of minutes to boot up (it might need to be either upgraded or downgraded to match the current version on the switch ..it will happen automatically), whole process is non-disruptive process.