Help

Announcement Banner
Start a discussion

UdoHase

updated

8 years ago

Solved!

Go to Solution
U

UdoHase

7 Posts

0

3459

June 1st, 2018 04:00

Isilon Gen6 Frontend Connectivity

Hi All,

IHAC who wants to connect some Nodes of a Gen6 Cluster (A200) on a 1GbE Switch. Is this possible/supported? Are the 10G Frontend Interfaces are 1GbE enabled?

many thanks for hints..

regards uwe

  • PL

    Phil.Lam

    4 Apprentice

    •

    642 Posts

    •

    15 Points

    2494

    0

    Posted June 4th, 2018 11:00

    UweNaumann


    No, the NICs on Isilon are not auto-sensing.

  • D

    DevinLucas

    1 Rookie

    •

    16 Posts

    2494

    0

    Posted June 1st, 2018 07:00

    Gen6 A200 nodes all have a single 1Ge port in addition to two 10GigE ports.  Just plumb those up, you don't need to use the 10Gig ports.

  • U

    UdoHase

    7 Posts

    2494

    0

    Posted June 1st, 2018 09:00

    yes i know about the 1GbE Interfaces on Gen6 Nodes.... But the main question was, if it is possible to connect the 10GbE ports on the A400 Nodes on 1GbE Switchports?

    regards Uwe

  • P

    philippspohr

    1 Rookie

    •

    107 Posts

    2494

    0

    Posted June 4th, 2018 01:00

    But keep in mind that you don't have LACP with only one network connection. The 1Gb port is normally used for management.

  • U

    UdoHase

    7 Posts

    2494

    0

    Posted June 4th, 2018 23:00

    thanks for all responds...

    regards uwe

Dell Support Resources

Latest Solutions

View More