
Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
UNSOLVED
R
Rsouthland
1 Message
0
6461
November 2nd, 2015 00:00
Aurora R2 - 6 beeps, black screen
I upgraded to Windows 10 after the release. During the upgrade, I did notice that my motherboard battery was going low as I was getting a beep indicating it needed replaced. I went on vacation, came back to the computer and now I get the following...
I've seen lots of posts on this issue, but no real solution. Like everyone else with this issue, my machine is black screen and 6 fast beeps after start up. Nothing else. Since I've read a lot of suggestions, I've tried a lot of stuff.
I've replaced the motherboard with a new battery.
I've replaced the stock 575w power supply with an 875w, same harness. I have a new harness, I just didn't go through the trouble, yet.
I've changed out the ram
The only thing I haven't done is replaced my video cards, yet. I know it's a video error, but it's 6 beeping with or without the video cards in the slots, on the new and old motherboard.
At this point I don't know what else to do.
Thoughts?
Responses (1)
Solutions (0)

Alienware - Rodrigo
9 Technologist
•
4398 Posts
316
0
Posted November 2nd, 2015 12:00
Hi,
It sounds like a video card failure, especially because your getting 6 beeps with no post and 6 beeps indicate a video card failure. We recommend you replace the video cards.