
Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
Solved!
Go to SolutionGR
gourami.rr
1 Rookie
•
3 Posts
1
47265
October 14th, 2015 08:00
Intel Management Engine Interface Problem
This device cannot start. (Code 10)
STATUS_DEVICE_POWER_FAILURE
Have installed latest intel driver for this on my Dell 8700 and it is still flagged as non-operational in device manager.
1 person also has this problem
Responses (4)
Solutions (0)
gourami.rr
1 Rookie
•
3 Posts
20471
0
Posted October 14th, 2015 21:00
Why copy down all BIOS settings? Shouldn't the BIOS reset to default settings after battery reinstall?
Is it fixed?
Always good to copy the settings before resetting BIOS to the defaults, because the defaults may not be the right configuration for your system.
Eg, the default SATA Mode setting might be RAID AutoDetect/ATA but you need AHCI because SATA drivers are installed, etc...

RoHe
12 Elder
•
45230 Posts
•
172625 Points
20471
1
Posted October 14th, 2015 13:00
Always include version of Windows.
Read this at the Microsoft forum.
I'd start with clearing BIOS (eg, last post over there):