Unsolved
This post is more than 5 years old
1 Rookie
•
52 Posts
0
933
November 11th, 2011 14:00
Doubts with errors in groups under Monitoring Screen.
Hi all,
I´ll appreciate your help with the following..
My configuration is with a Overland Storage ArcVault 24 unit and Networker 7.4 SP2.
Two of my groups are shows up with a red circle in Monitoring-->Group option (MonitoringGroup file), both (MaquinasVirtualesDiario and Diario) are in 100% BUT when I reviewed it each one in detail, I found 5 items in failed state under "MaquinasVirtualesDiario" (check MonitoringGroupDetails1 file). In the other Group "Diario" I found 1 error indicanting timeout (check MonitoringGroupDetails2).
Could you say me why appears "100%" if an error exist? I understand that in total 6 items where aparently no were backed up.
What can i do to fix these errors?
Thanks
acc
ble1
6 Operator
•
14.4K Posts
•
56.2K Points
0
November 14th, 2011 10:00
When you run the group it starts at 0% completion because - it just started. When group completes, it has done 100% of the tasks. It does not matter if those tasks have been successful or not - they have been executed and completed. % shows completion progress and whether is successful or not is shows through group status. These two are different.
betoco
1 Rookie
•
52 Posts
0
November 22nd, 2011 14:00
Ok, Thanks. I Understood the difference.
Where can I find detailed logs when group status is marked as fail?
ble1
6 Operator
•
14.4K Posts
•
56.2K Points
0
November 26th, 2011 06:00
In GUI you can check group details.
On CLI, you can check either savegrp log or daemon.raw or just check /nsr/tmp/sg/GROUP_NAME folder (will contain current or last run data).