Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
UNSOLVED
how do i run "show interfaces counters errors" on Dell 6248p switch?
What is the corresponding commands of "show interfaces counters errors" command on 6248p switches? or is there any other command that does the same job? Thank you.
On this model of switch this command is not an option as far as i understand? Is there another way around to get same results?
Thank you all,.
Info is needed by a third party company so i am not sure what they are into . We have Dell N3048P switch and "show interfaces counters errors" running fine. But when it comes to 6248P i am getting error message.
"show interfaces counters ?" gives me additional "ethernet" and "port channel" commands. I have a feeling that this model of switch doesn't support this command.
from 6248P
392Basement#show interfaces counters ?
Press enter to execute the command.
ethernet Ethernet port.
port-channel Link Aggregation interface.392Basement#show interfaces counters errors
^
% Invalid input detected at '^' marker.from N3048P
power400#show interfaces counters errors
Align-Err: Alignment errors
FCS-Err: FCS errors
Xmit-Err: Total transmit errors
Rcv-Err: Total packets received with MAC errors
UnderSize: Fragments/undersize received
OutDiscard: Total transmit packets discardedPort Align-Err FCS-Err Xmit-Err Rcv-Err UnderSize OutDiscard
--------- ---------- ---------- ---------- ---------- ---------- ----------
Gi1/0/1 0 0 0 0 0 0
Gi1/0/2 0 0 0 0 0 0
Gi1/0/3 0 0 0 0 0 1532
Gi1/0/4 0 0 0 0 0 0
Gi1/0/5 0 0 0 0 0 0
Gi1/0/6 0 0 0 0 0 0
Gi1/0/7 0 0 0 0 0 0DELL-Josh Cr
Community Manager
•
9741 Posts
•
44395 Points
6310
0
Posted February 20th, 2020 10:00
That is right, it doesn’t have the same command.
DELL-Josh Cr
Community Manager
•
9741 Posts
•
44395 Points
6334
0
Posted February 19th, 2020 15:00
Hi, Does show interfaces counters give you the information you need? It may have things you don’t need.