I am in the process of upgrading the RAM in our single-processor R710 and would like to verify the configuration before buying the memory. If I am reading the documentation correctly, I believe the following memory configuration should work giving us a total of 96GB.
using dual-rank 16GB DDR3 RDIMMs (Kingston KTD-PE313LV/16G)
A1 - 16GB
A4 - 16GB
A7 - empty
A2 - 16GB
A5 - 16GB
A8 - empty
A3 - 16GB
A6 - 16GB
A9 - empty
Can anyone confirm that this configuration should work correctly?
Could I even go up to 144GB by populating slots A7, A8, and A9?
For single or dual-rank memory modules: • One memory module per channel supports up to 1333 MHz. • Two memory modules per channel supports up to 1067 MHz. • Three memory modules per channel are limited to 800 MHz, regardless of memory module speed.
When you said "I may be wrong", it left some doubt as to how sure you were about it ... so, I showed you where and what the manual it says, so you can be more sure next time. ;)
DELL-Josh Cr
Community Manager
•
9763 Posts
•
44886 Points
938
1
Posted May 20th, 2013 10:00
Yes, if you use dual ranked DIMMs you can fully populate with 16GB DIMMs, so on a single processor 144GB.