UNSOLVED
S
scott_Walker_Fs
2 Posts
0
1181
September 11th, 2018 16:00
Playing with Tech preview, having issues adding MD Storage.
I'm trying to add some MD storage arrays.
I add both controllers, turn on SNMP (by adding public in the alerts config).
But ALL chassis fail with.
Running
Operation failed.
The operation cannot be completed because a connection error occurred while trying to connect to the device.
Task Failed. Execution has completed
When I snmpwalk the chassis from a host on the same network I get everything just fine:
SNMPv2-MIB::sysDescr.0 = STRING: DELL MD34xx 0825
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.674.10893.2.31
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (175913) 0:29:19.13
SNMPv2-MIB::sysContact.0 = STRING: None
SNMPv2-MIB::sysName.0 = STRING: None
SNMPv2-MIB::sysLocation.0 = STRING: None
SNMPv2-MIB::sysServices.0 = INTEGER: 4
SNMPv2-MIB::snmpInPkts.0 = Counter32: 52
SNMPv2-MIB::snmpOutPkts.0 = Counter32: 52
SNMPv2-MIB::snmpInBadVersions.0 = Counter32: 0
SNMPv2-MIB::snmpInBadCommunityNames.0 = Counter32: 0
SNMPv2-MIB::snmpInBadCommunityUses.0 = Counter32: 0
SNMPv2-MIB::snmpInASNParseErrs.0 = Counter32: 0
SNMPv2-MIB::snmpInTooBigs.0 = Counter32: 0
SNMPv2-MIB::snmpInNoSuchNames.0 = Counter32: 0
SNMPv2-MIB::snmpInBadValues.0 = Counter32: 0
SNMPv2-MIB::snmpInReadOnlys.0 = Counter32: 0
SNMPv2-MIB::snmpInGenErrs.0 = Counter32: 0
SNMPv2-MIB::snmpInTotalReqVars.0 = Counter32: 59
SNMPv2-MIB::snmpInTotalSetVars.0 = Counter32: 0
SNMPv2-MIB::snmpInGetRequests.0 = Counter32: 6
SNMPv2-MIB::snmpInGetNexts.0 = Counter32: 60
SNMPv2-MIB::snmpInSetRequests.0 = Counter32: 0
SNMPv2-MIB::snmpInGetResponses.0 = Counter32: 0
SNMPv2-MIB::snmpInTraps.0 = Counter32: 0
SNMPv2-MIB::snmpOutTooBigs.0 = Counter32: 0
SNMPv2-MIB::snmpOutNoSuchNames.0 = Counter32: 0
SNMPv2-MIB::snmpOutBadValues.0 = Counter32: 0
SNMPv2-MIB::snmpOutGenErrs.0 = Counter32: 0
SNMPv2-MIB::snmpOutGetRequests.0 = Counter32: 0
SNMPv2-MIB::snmpOutGetNexts.0 = Counter32: 0
SNMPv2-MIB::snmpOutSetRequests.0 = Counter32: 0
SNMPv2-MIB::snmpOutGetResponses.0 = Counter32: 76
SNMPv2-MIB::snmpOutTraps.0 = Counter32: 0
SNMPv2-MIB::snmpEnableAuthenTraps.0 = INTEGER: disabled(2)
SNMPv2-MIB::snmpSilentDrops.0 = Counter32: 0
SNMPv2-MIB::snmpProxyDrops.0 = Counter32: 0
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.674.10893.2.31
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (175913) 0:29:19.13
SNMPv2-MIB::sysContact.0 = STRING: None
SNMPv2-MIB::sysName.0 = STRING: None
SNMPv2-MIB::sysLocation.0 = STRING: None
SNMPv2-MIB::sysServices.0 = INTEGER: 4
SNMPv2-MIB::snmpInPkts.0 = Counter32: 52
SNMPv2-MIB::snmpOutPkts.0 = Counter32: 52
SNMPv2-MIB::snmpInBadVersions.0 = Counter32: 0
SNMPv2-MIB::snmpInBadCommunityNames.0 = Counter32: 0
SNMPv2-MIB::snmpInBadCommunityUses.0 = Counter32: 0
SNMPv2-MIB::snmpInASNParseErrs.0 = Counter32: 0
SNMPv2-MIB::snmpInTooBigs.0 = Counter32: 0
SNMPv2-MIB::snmpInNoSuchNames.0 = Counter32: 0
SNMPv2-MIB::snmpInBadValues.0 = Counter32: 0
SNMPv2-MIB::snmpInReadOnlys.0 = Counter32: 0
SNMPv2-MIB::snmpInGenErrs.0 = Counter32: 0
SNMPv2-MIB::snmpInTotalReqVars.0 = Counter32: 59
SNMPv2-MIB::snmpInTotalSetVars.0 = Counter32: 0
SNMPv2-MIB::snmpInGetRequests.0 = Counter32: 6
SNMPv2-MIB::snmpInGetNexts.0 = Counter32: 60
SNMPv2-MIB::snmpInSetRequests.0 = Counter32: 0
SNMPv2-MIB::snmpInGetResponses.0 = Counter32: 0
SNMPv2-MIB::snmpInTraps.0 = Counter32: 0
SNMPv2-MIB::snmpOutTooBigs.0 = Counter32: 0
SNMPv2-MIB::snmpOutNoSuchNames.0 = Counter32: 0
SNMPv2-MIB::snmpOutBadValues.0 = Counter32: 0
SNMPv2-MIB::snmpOutGenErrs.0 = Counter32: 0
SNMPv2-MIB::snmpOutGetRequests.0 = Counter32: 0
SNMPv2-MIB::snmpOutGetNexts.0 = Counter32: 0
SNMPv2-MIB::snmpOutSetRequests.0 = Counter32: 0
SNMPv2-MIB::snmpOutGetResponses.0 = Counter32: 76
SNMPv2-MIB::snmpOutTraps.0 = Counter32: 0
SNMPv2-MIB::snmpEnableAuthenTraps.0 = INTEGER: disabled(2)
SNMPv2-MIB::snmpSilentDrops.0 = Counter32: 0
SNMPv2-MIB::snmpProxyDrops.0 = Counter32: 0
Is this a broken/known issue, or am I doing something wrong?
DELL-Sam L
Community Manager
•
8121 Posts
•
34628 Points
970
0
Posted September 17th, 2018 07:00
Hello scott_Walker_Fs,
With an MD34xx systems you need to use MDSM to manage them. You can use SNMP traps to see the alerts that your MD34xx gets. Here is the link to the administrator guide and if you look on page 45-47 it shows how you want to configure SNMP alerts.
Please let us know if you have any other questions.