Hi, I'm using a Dell Optiplex GX270 Series computer, Windows XP SP2....
The other day out of the blue during system startup, I get a black screen that only says 'Error Loading Operating System', the only thing I can do is access the Setup and Boot Menu, after looking into this problem on the net it seems the view is its a BIOS problem....
A lot of people seem to say the following....
"Go to the BIOS settings of your machine and change the translation method used to access the hard drive from the default setting “Auto” to “Large” (not LBA, not CHS!). Reboot and with some luck installation will pick up at the point where it aborted before. If it doesn’t continue with the second part of the installation, you have to start over and do a fresh install. Leave the BIOS setting at “Large” for that task!"
If this is correct, how do I do this? I have been through the menu a number of times and cant figure out the steps, could someone help me out with this problem?
I'm terrified I'm going to lose my entire hard drive....
P.S. I have tried to run the windows disc, but the computer wont read anything from the drive, so I cant even try a repair or a reinstall....
Help me please!!!!!
Sorry, I also posted this in the 'BIOS' section, before realizing I should have posted this here.....
You can run chkdsk several times to try and recover the bad data/sectors, otherwise:
3 options imho
1. Remove the hard drive and install it in an "external USB hard drive enclosure", connect it to another PC and see if you can copy your important data off of the drive, then do #3
2. If the above fails to work, go here http://www.grc.com/sr/spinrite.htm and spend $89 and run spinrite6 on the PC to try and recover the bad data/sectors, this software works very well unless the drive is physically damaged somehow, no way to know but try it.
3. Replace the drive and re-install windows.
If your data on the drive is not worth anything to you, then just save yourself some time and money and replace the drive and reinstall XP.
OK, I fixed the problem with help from another computer help website, here is what I did....
I ran the Recovery Console, and at the prompt typed fixboot and hit Enter...
Removed the XP CD and re-booted after turning on all functions and the boot process.
That was it, I'm so relieved, wish I knew what caused this in the first place.....
Thanx a bunch for your help mombodog....:smileyhappy:
mombodog
2 Intern
•
12735 Posts
2499
0
Posted May 13th, 2008 20:00
Those bios settings do not exist on a Dell, so forget that.
Most likely your hard drive has failed or the data cable that connects it to the motherboard has.
Acess setup (bios) and see if the hard drive is being detected in there, is it? Look in "drive configuration"
Next run the Dell diagnostics on the hard drive. 3 ways to do it.
http://support.dell.com/support/topics/global.aspx/support/dsn/en/document?c=us&dl=false&l=en&s=gen&docid=126A722713F6D0D0E0401E0A55174AE6&doclang=en#2
http://support.dell.com/support/topics/global.aspx/support/dsn/en/document?c=us&dl=false&l=en&s=gen&docid=A2014D03404049C79D88A8FC9210B4B0&doclang=en
create a diagnostics floppy diskette
http://support.dell.com/support/downloads/download.aspx?c=us&cs=19&l=en&s=dhs&releaseid=R76924&SystemID=PLX_PNT_CEL_GX270&servicetag=&os= WW1&osl=en&deviceid=3841&devlib=0&typecnt=0&vercnt=3&catid=-1&impid=-1&formatcnt=3&libid=13&fileid=100710