I bought an Intel optane 280gb U2 drive I was planning to use as an OS drive, but after installing it the bios or disk manager doesn't seem to recognise it, are there any other steps I need to do to get it to work?
Why not just get an m2 nvme pcie drive for the OS. For less than half this price you can get an M2 nvme drive thats faster and with more than 4x the storage capacity.
PCIe NVMe 3.0 x4 drive requires GPT partition UEFI Secure boot off and F6 mass storage Drivers Intel® RST/Application version 17.5.2.1024 or later for the OS to "SEE" a drive to install on.
F6flpy-x64.zip RST Drivers with Intel® Optane™ memory support will be required during Operating System (OS) installation to detect PCIe* NVMe* drive, refer to system manufacturer documentation or Intel Customer Support. You cannot point to a zip or exe file you must extract the zip to the root of USB Flash drive that the OS is installed from.
Jedfactor
4 Posts
860
0
Posted November 29th, 2019 08:00
It is not a cache drive it is one of these.
https://www.intel.co.uk/content/www/uk/en/products/memory-storage/solid-state-drives/consumer-ssds/optane-ssd-9-series/optane-ssd-900p-series/900p-280gb-2-5-inch-20nm.html