Solved!
Go to SolutionP
Patrick_Alienware
1 Rookie
•
32 Posts
0
3881
November 1st, 2022 07:00
Aurora R12, should I switch to water cooling?
New to building, limited knowledge.
Hello, I have an Alienware Aurora R12, and wanted to get into water cooling. The reason is, I'm getting a new RTX 3080 ti (one that fits) and obviously; This will cause my CPU to get very hot as well as my PC. I've been advised to switch to water cooling, but I don't know where to get started. Would anyone mind helping guide me into this process? Please and thank you.
Here are my specs:
Ram: 32 gigs (4 slots x 8 gigs)
Graphics card: RTX 3080 TI
PSU: 850 watts (Fully modular)
CPU: 11th Gen Intel Core i5 11400F (6-Core, 12MB Cache, 2.6Ghz to 4.4GHz)
If you have any questions, I will be answering.
1250
1
Posted November 1st, 2022 08:00
See R12 service manual has instructions on how to install the liquid cooling assembly: R12 service manual
I do not believe Dell sells these coolers, but it never hurts to check with a sales person.
1243
0
Posted November 1st, 2022 09:00
1235
0
Posted November 1st, 2022 10:00
Are you looking to get into custom water cooling or an All-In-One bolt on solution?
1231
0
Posted November 1st, 2022 11:00
Do these aftermarket solutions work? Will it cause any issues since its not one of the Alienware components? If not thanks for the link!
1230
1
Posted November 1st, 2022 11:00
You will need to remove the existing thermal paste, and likely apply new thermal paste unless it comes pre-applied.
I would recommend Noctua thermal paste NT-H1 as it is not electrically conductive and provides good results.
You will also need Isopropyl alcohol to remove the existing thermal paste. I recommend 99% pure or higher to avoid residue left behind. A lot of the ones they sell in stores these days are 50% or less pure. I would avoid those.
The easiest solution is the OEM cooler as it can be installed as per the service manual. Any aftermarket might cause installation or other issues, although they usually install without issue.
1226
0
Posted November 1st, 2022 11:00
Most likely the All-In-One bolt on, Since I have little clue what I'm doing the custom water cooling seems more confusing.
1097
0
Posted November 1st, 2022 12:00
@Vanadiel wrote:
I would recommend Noctua thermal paste NT-H1 as it is not electrically conductive and provides good results.
Those are the 2 main reasons I use it also.
I'm all on-board with Liquid-Coolers (all 3 of my newest desktops have them) but with just an Intel-i5 I question the need. When you get all the cores up to 100% utilization for a while ... are you seeing temps above 80c ?
Also of note: That sure is a nice Nvidia card you got there.
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired)
- Like many of you, I can appreciate a good game-engine.
- I answer questions here, but I'm not a Dell employee.
- Consider giving posts you like a "thumbs-up"
- Posting models-numbers and software versions speeds trouble-shooting.
- Click "Mark as Accepted Answer" on any post that answers your question best.1225
0
Posted November 1st, 2022 12:00
May you leave a link to the OEM cooler? Can't seem to find it, sorry,
ProfessorW00d
6 Operator
•
2371 Posts
•
10241 Points
2237
1
Posted November 1st, 2022 13:00
Another option is the NZXT Kraken-120 which was just successfully installed by another Alien on their Aurora R10 (same chassis as R12).
If you are currently air cooled, you will also need the VRM heatsink once you go with liquid cooling.
Also, whatever CPU cooler is currently installed will have thermal paste applied . . . and require cleaning.