Solved!
Go to SolutionAurora-R4, error code 2000-0511, validation 118549
Hello! The desktop of my brother was "dead" some months ago. The CPU was out of order. I changed it, and a message is running when we turning on the desktop. "Alert ! CPU Fan failure... Strike F1 to continue F2 to run Setup utility". Press F1 launch the computer without any problem. But I would like to solve this problem. I changed the graphic card too, from 760 to a 960. I already post this before, but, after the update of the BIOS (A9 -> A11), the validation changed from 89305 to 118549 Thanks Aurora-R4 i7-4820K GTX 960 2GB 8GB DDR3 500GB SSD
3076
0
Posted November 26th, 2018 10:00
"Alert ! CPU Fan failure. Strike F1 to continue F2 to run Setup utility is very specific.
Either the cooling fan is bad or the Alienware MS-4194 Aurora FX Master Control Board is bad.
Also possible that the liquid cooling assembly was not installed properly, that's why you're getting that ePSA error. This video is related to the installation of the liquid cooling assembly.
3073
0
Posted November 26th, 2018 10:00
2000-0511 is a Fan Failure notice. When you changed the CPU did you also change the cooler and fan? Dell fans have an extra connection that is detected by the Power On Self Test. Non-Dell fans do not have this and you will always get the fan failure notice and have to press F1. No way to get around this with a non-Dell fan.
Inspiron 16 5630 Laptop and WD22TB4 Docking StationSelf-built desktop for recording studio application3069
0
Posted November 26th, 2018 10:00
I can't launch the video, have you a youtube link?
3065
0
Posted November 26th, 2018 10:00
I don't change the watercooling. But, the upper "circuit-board", right from CPU-FAN, there is a "sensor" but there no cable. There is normal?
3060
0
Posted November 26th, 2018 10:00
https://www.youtube.com/watch?v=DOlWxc9tt6s
https://www.youtube.com/watch?v=3-pMjkTs1HM
https://www.impactcomputers.com/5560w.html
5560W - Liquid Cooling Assembly for CPU
KIT, HTSNK, H2C, CPU, ASETEK, AUR4 See 35-101-1012109 for the radiator only
3052
0
Posted November 26th, 2018 12:00
Thank you very much Tesla, it works! Now, there is no error when I boot. Thanks for helping me!
Tesla1856
10 Wizard
•
17985 Posts
•
71600 Points
3057
0
Posted November 26th, 2018 11:00
Asetek cooler's radiator fan should instead use SYS_FAN header.
"Top Lighting Board" Connections:
CPU_Pump (Asetek Cooler) pump
Sys_Fan (Asetek Cooler) radiator or main system fan
CPU_Fan - No connection
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired)
- Like many of you, I can appreciate a good game-engine.
- I answer questions here, but I'm not a Dell employee.
- Consider giving posts you like a "thumbs-up"
- Posting models-numbers and software versions speeds trouble-shooting.
- Click "Mark as Accepted Answer" on any post that answers your question best.