I used Winrar and looked at the downloaded tarball with it and it states the file is corrupt. I used Windows Explorer to grab the file from the ftp site. I am now using ftp from command prompt to see if the file downloads without corruption.

I downloaded 1.2 some 3-4 weeks ago. From what I see on ftp it is the same version since last year. Did you check md5 to make sure download was correct?

Once I downloaded via CLI had no issues doing the install, but now I do have an issue where it only formatted the /data01 partition and not the /data02 & /data03. I did edit the ave-part.sh script to reflect the .5TB install and that seemed to go fine although I did not watch the entire process. There is over 300GB of space remaining in the ESX datastore after the 3 partitions were created so I know it is not a space issue. Wanted to see if you have seen this before, but I am also attempting a re-install today. Thanks!

Well figured out my issue with the help of EMC support using the .5TB section of the ave-part.sh does not work with the 1TB tarball. Support gave me the download for the .5TB edition tarball. Thanks!

I am assuming so for 1.0 we cannot run 1.1 or 1.2 no 64 Bit hardware available for my testing.

There are two tarballs!? Are you sure. I was told there was one since 1.1 and with 1.2 it worked for me for 0.5TB installation (the only difference is which ave-part you run, but both should be within same tarball available from ftp.

Ah ok, that makes more sense now. Indeed, for 1.0 there are two tarballs.