I'm not very familiar with EMC Networker and NDMP so I would like to get some feedback, tips and ideas for the following configuration:
Let me try to give a little bit of background:
I have a customer that has a NS20 (DART 5.6.43) wich they have been using to support their VMware environment. They are using a mix of NFS and iSCSI to support 5 physical ESX servers and about 30 virtual machines.
They recently bought more disk to be dedicated for file serving and replace some old Windows File Servers. For this they configured two file system of 2 TB each and exported to a single CIFS server. They have migrated about 90% of their data and they are about to push this to production.
They want to setup the backup for this two file systems before rolling out to production. Their backup environment is basically a EMC Networker server and they have a Windows Storage Node where the tape library is connected.They are trying to configure NDMP to perform the backup and I'm not sure the configuration they have is okay.
So finally my first question is:
Is it okay (supported) to configure NDMP in the Celerra to backup the file system using a storage node in the network? -- PS. I know that they would get much better performance if the TL unity was connected directly to the Celerra. I have already proposed that.
The second question is about the way they setup the jobs in the networker. Since they only have two file system of 2 TB they setup many different jobs configuring the save_set to different directories within the same file system.
For example:
FS01 has the following structure:
/FS01
|___ GROUPS
| |___Boston
| |___NY
|
|___ SHARED
| |___Public
|
|___ QUARANTINE
The networker has four different jobs to the same file system with SNAPSURE=Y configured:
Job 1 - Daily backup for save_set /FS01/GROUPS/BOSTON
Job 2 - Daily backup for save_Set /FS01/SHARED/Public
Job 3 - Weekly backup for save_set /FS01/Quarentine
Job 4 - Weekly backup for save_set /FS01/Groups/Public
Job 5 - Weekly backup for save_set /FS01/Quarantine
Is it okay to have multiple jobs that point to different folders within the same file system and create snaps at the same time you are copying the data from that FS or is better to have different jobs point to the entire file system and add the EMC_EDIR1=(Directory) to exclude directory that we don't want to be backed up???
Please any tips, feedbacks and ideas will be of great help!!
Is it okay (supported) to configure NDMP in the Celerra to backup the file system using a storage node in the network? -- PS. I know that they would get much better performance if the TL unity was connected directly to the Celerra. I have already proposed that.
Hi Rafael,
yes - that is fully supported with Networker - its listed in the support matrix as Heterogeneous 3-Way NDMP
basically the data mover creates a backup stream and sends it over TP/IP to the storage node, were a tape server piece puts it onto tape (or disk).
Is it okay to have multiple jobs that point to different folders within the same file system and create snaps at the same time you are copying the data from that FS or is better to have different jobs point to the entire file system and add the EMC_EDIR1=(Directory) to exclude directory that we don't want to be backed up???
I'm not sure if its even possible to have multiple NDMP BIS streams running concurrently on the same file system - it might be that the first NDMP Backup with Integrated SnapSure checkpoints (BIS) "locks" the file system.
I'll ask.
I wouldnt be surprised though if the second stream wouldnt give you much additional performance - when working on the same disks the first one can keep them pretty busy.
First of all, let me clarify that, my following statement is completely from my understanding - but I have not tested this out on my own. Per my understanding, this is doable to have multiple NDMP backup jobs running for the same file system from Networker point of view. However, as you are using the Integrated Snap (Checkpoint) - it adds little complexities especially each session should create a respective checkpoint - and it should work, although I have not tested it out. However, you can not use the same start time for these savesets as we can not create multiple checkpoint of the same file system at the same time. So, I'll suggest you first test this out with multiple savesets starting at different times (at least 5-10 mins apart).
However, you can not have more than 4 simultaneous NDMP backup streams on a particular data mover - so, anyway you will be limited to max 4 simultaneous backups.
Anyway - I am sure Rainer will get some more details for you. In the meantime, if you are doing this test, please keep us posted.
Rainer_EMC
6 Operator
•
8645 Posts
664
0
Posted March 5th, 2010 02:00
Hi Rafael,
yes - that is fully supported with Networker - its listed in the support matrix as Heterogeneous 3-Way NDMP
basically the data mover creates a backup stream and sends it over TP/IP to the storage node, were a tape server piece puts it onto tape (or disk).
Rainer