i got all informations from this site: https://community.emc.com/docs/DOC-1038

i tried to connect to eama1 via the xam api if i try to write data in the cluster i got the error message operation is not allowed.

if i try the sam with the centera native it is possible to wirte data to the cluster

or is it possible that xam only works with the us2 clusters?

What profile (PEA file) are you using? XAM can be used to connect to all the public clusters.

i tried emea1_profile1_rdqeDcw.pea and all other profiles. and I get allways this error message: com.emc.centera/FP_OPERATION_NOT_ALLOWED

all pea files for the us2 cluster works fine with Xam

Connecting to a replica is transparent to an application, you simply connect to a primary that has a replica established. Full details of primary / replica configurations and associated PEA files can be found on the public cluster information page within this site.

I have verified that there does seem to be a prioblem using XAM on the EMEA1 / EMEA2 replicated pair. As Paul mentioned, we will need get the lab admin to investigate this.

I am aware that this is the only replicated pair, but from an application standpoint this should be transparent and should not affect your testing. While for certification purposes there are checks that need to be made on the replica, but you can safely assume that this functionality works as it is cluster (not application) dependent.

ok there is obviously an issue with the emea cluster just use us2 while we find a resource window to fix it (they are actually all in the same datacentre in the USA)

thanks for the reply

now i have a another question

if i try to connect to the us2 servers via shxam or xamverify i get the message ErrorMessage: xam/vim not found

i read all dokus and made the steps of install correctly but i was not able to find a solution.

If the VIM cannot be found then it must not be in a location on your path (or the VIM path) or is not accessible (check that it has read and execute permission). If it is working programmatically but not with the tools then there must be a difference in the environments being used.

Please refer to the release notes of the XAM SDK / VIM for the platform you are using.

I got a question as well about permissions: how can I get actual permissions for the connection (read/write) after I'm connected to an EMC system via XAM? Thannks, best regards