‎Error: Destroy LUN | DELL Technologies

Start a discussion

UNSOLVED

STAI

updated

16 years ago

STAI

1 Rookie

•

81 Posts

0

1161

December 16th, 2010 06:00

Error: Destroy LUN

LUN 14 - Could not be destroyed.

It is participating in one of the following storage features:

1). Storage Group

2). Snapshot

3). Clone

4). SAN Copy

5). MirrorView

6). MetaLUN

7). LUN Migration

Problem is it does not belong to any of these features. I'm doing this from the GUI as I'm a Noob.

Any suggestions?

Thanks.

K
kenn2347
4 Apprentice
•
542 Posts
527
1
Posted December 16th, 2010 07:00
So when you look under either SP in the lun folder, this Lun 14 shows the raid type, FC or SATA and nothing else? that is how you can tell if it is not being used by anything.

If that lun does not show up under either SP, then it is probably a private lun and being used by something.
S
STAI
1 Rookie
•
81 Posts
527
0
Posted December 16th, 2010 07:00
Wait... when I checked this out, it does show that its participating in a "snapshot". Reservered snapshots is under that. This is under SPA
D
dynamox
11 Legend
•
20419 Posts
•
87439 Points
527
0
Posted December 16th, 2010 07:00
it's not a private LUN is it ?
S
STAI
1 Rookie
•
81 Posts
527
0
Posted December 16th, 2010 07:00
I dont think so. Its current state is "normal".
S
STAI
1 Rookie
•
81 Posts
527
0
Posted December 16th, 2010 07:00
Another note to consider:

Its particiaption in a "snapshot" is only on the remote end. Here locally I dont see the same information. Its almost like I should have began deleting this from the remote site first instead of locally. Would it make a difference if I logged directly into the SAN at the remote site and started a Navis session then?