UNSOLVED

Consty

updated

17 years ago

C

Consty

2 Intern

•

232 Posts

0

1605

April 5th, 2010 15:00

Vault disk replacement

Hi,

One of my Vault disks is bad (orange), to replace it I suppose that I just want to

remove it and put another one ?

Regards

Consty

  • nandas

    6 Operator

    •

    1473 Posts

    393

    0

    Posted April 5th, 2010 16:00

    I 'll suggest you to open a Service Call to EMC support before replacing the drive. Typically Vault disk replacement is done only by EMC CE or authorized support person. The drive can be replaced but some guidelines needs to be followed.

    Thanks,
    Sandip

  • chiodp

    149 Posts

    393

    0

    Posted April 5th, 2010 16:00

    For perform a disk replacement by yourself , you need to install the navisphere service task (NST) you can download it from powerlink .

    When you lunch the NST you will point your array and select replace disk , NST will health check your array and will inform if. It is safe to replace the disk or you need to have a ce .

    In any case you need to open a service request .

  • Consty

    2 Intern

    •

    232 Posts

    393

    0

    Posted April 7th, 2010 01:00

    Hi,

    I got the following result from the NST analysis, I think

    CE is not necessary and I can change the drive, can I ?

    Thanks

    Regards

    Consty

    --------------------------------------------------------------------------------

    Analysis is complete.
    Storage system is a candidate for disk replacement.


    Disk fault verified.

    Details:

      NST Version : 6.28.55.0.97
      Current Date and Time : 2010-04-06 19:45:57
      Subsystem Serial Number :  CK200080900814
      Subsystem Model Number :  CX3-40f
      FLARE Operating Environment Rev :  03.26.040.5.011
      Enclosure type :  DAE3P
      Enclosure Speed : 4Gb/s
      Location :  Bus 0 Enclosure 0 Disk 3
      Drive Serial Number : 3LN4GHXX    
      TLA Part Number: 005048730
      Drive Faulted Time: 2010-03-30 21:25:48