Each storage controller has an internal battery backup unit. Write cache is mirrored between the two storage controllers. If a power failure occurs, the battery backup unit provides power to the storage controller so that the write cache can be saved to an SSD within the storage controller
So.. Two possible options: this can be a software problem that may be able to be solved with a firmware update. Or this is a hardware issue that will need a hardware replacement.
Please, check your firmware and, if possible, update it. If the problem persist or the update is not possible, you will need to contact phone support if your Compellent is still in warranty for a log analysis and a possible hardware replacement.
I have seen this more than once and support was able to enable it again from command line every time. Never needed to replace the battery module neither was seen a error message on the summary page.
Did you manage to resolve the issue? When you had the issue for the first time, did you reseat the controller with battery out? I had the same issue and after reseating the controller, I had no more errors.
You could try.
And you can call Dell out of warranty support. They will help you.
Please tell how you did this. i have been dealing with this issue for over a year. i have gone through 4 sets of batteries they will work for a few days then fail with the cache board battery requires replacement. once they made it a week and these are new batteries that i am using. when i saw your post i got so excited that maybe you hold answer to this issue.
rswislocki
52 Posts
6417
0
Posted May 30th, 2017 04:00
Is the controller cache battery ok (both controllers)?