‎show recent changes on MDS 9506 | DELL Technologies

Start a discussion

brad12341

updated

16 years ago

Solved!

brad12341

207 Posts

0

860

February 15th, 2011 14:00

show recent changes on MDS 9506

Hello,

Is there a simple way to find any recent changes to a switch config (zone changes etc)?

D
dynamox
11 Legend
•
20419 Posts
•
87439 Points
436
0
Posted February 15th, 2011 21:00
sh accounting log

you can pipe with begin to get to specific date

sh accounting log | begin "Feb 15"
D
dynamox
11 Legend
•
20419 Posts
•
87439 Points
436
0
Posted February 15th, 2011 14:00
sh logging logfile
B
brad12341
207 Posts
436
0
Posted February 15th, 2011 15:00
Thanks, I've used show logging log to show errors etc. The lines below seem to indicate that it writes to the log whenever config changes are made by a user. Is there any way to find out what was changed at that time (maybe a new zone added etc)?

2011 Feb 14 09:27:04 pas-9506p-sw1 snmpd: SNMPD_SYSLOG_CONFIG_I: Configuration update from 1448_10.1.122.175 user/community name : A117603
2011 Feb 14 09:29:03 pas-9506p-sw1 snmpd: SNMPD_SYSLOG_CONFIG_I: Configuration update from 1448_10.1.122.175 user/community name : A117603
2011 Feb 14 09:29:13 pas-9506p-sw1 snmpd: SNMPD_SYSLOG_CONFIG_I: Configuration update from 1825_10.1.121.167 user/community name : admin
B
brad12341
207 Posts
436
0
Posted February 16th, 2011 14:00
accounting log looks good. That's the level of deatil I was looking for.