I have just noticed this as well.  Have you heard/found anything?

LMK if you find/learn anything, please.

You never know what you have until its gone, I suppose...

We hit this today using self-generated Dell Repository Manager baselines (after spending nearly 10 hour total attempting to finally upgrade to 3.2).  After a lot of trial and error with a CIFS location, it appears there is a new bug that if more than 1 period exists in the catalog path, it cannot connect. 

It's pretty sad especially given that each new iteration of a baseline through DRM increments the "version" by one in the format . .xml.

I manually renamed the catalog file to catalog.xml and was able to "edit"/re-confirm our existing catalog in OME.  Only at that point did all of the other card components show up in the compliance list

Hopefully this helps some other poor soul who managed to upgrade to 3.2

@whobutdrew 

Sorry to hear that you are no longer able to find the HBA and NIC Cards displayed under compliance report in the 3.2 OMEnterprise.

Please do follow the below steps to resolve this issue:

Update the catalog from Catalog Management (Check for Updates) wait for the catalog to get updated

Once Catalog gets updated please wait until the baseline gets updated and a new compliance report gets generated. 

Please update iDRAC Firmware on servers where you are not able to find the HBA and Network Cards 

once Firmware Update on the target machine gets complete, Please go ahead and refresh the inventory on all devices 

Wait for the Compliance Report to get generated once again and you should be able to find your cards getting displayed.

Thanks,

Anil Kumar V K R 

Dell EMC

#iworkforDell

@Mracekvb23 

Sorry to hear that you are no longer able to find the HBA and Network Cards in the 3.2 OMEnterprise.

Please do follow the below steps to resolve this issue:

Update the catalog from Catalog Management (Check for Updates) wait for the catalog to get updated

Once Catalog gets updated please wait until the baseline gets updated and a new compliance report gets generated. 

Please update iDRAC Firmware on servers where you are not able to find the HBA and Network Cards 

once Firmware Update on the target machine gets complete, Please go ahead and refresh the inventory on all devices 

Wait for the Compliance Report to get generated once again and you should be able to find your cards getting displayed.

Thanks,

Anil Kumar V K R 

Dell EMC

#iworkforDell

@anilkumarvkr 

I updated the catalog, let it finish, re-ran a full inventory of all of my devices, let that finish, and then checked a device which previously had a NIC FW update listed.  It still does not appear in the list.  Its version of iDRAC is up to date, according to the catalog (v2.63.60.62 on a PowerEdge R420).

What did I miss?

@whobutdrew 

Thanks for the information provided 

Could you please let us know if that NIC Card is being displayed in the OpenManage Enterprise under Hardware > NIC Information details 

Could you please provide us the Software Identity information of that iDRAC so that we can isolate the issue why NIC is not getting displayed under the compliance report on OpenManage Enterprise.

Thanks,

Anil Kumar V K R

Dell EMC

#iworkforDell