Have an MD3200 which shows 3 "failed Virtual Disks" but showing no problem with the Physical Disks.
Ran Recovery Guru but no change.
Anyone with a possible solution before going thru the lengthy process of checking the whole unit, patch it if necessary, re-initialize drives, re-create VDs, etc, etc?
The best thing to do would be to look at a support bundle to see what is going on. Based on what you stated it sounds like you have a ninja failure on your MD3200, but there could be another issue as well. I will send you a private message so that you can send me the support bundle, so I can review it.
Please let us know if you have any other questions.
I have same problem, I have 5 diskgroup in total, 2 of these Diskgroup, "DG3" and "DG4", has 2 virtual disk each one, problem is one of these VD is in failure for each DG
Physical disk are optimal, can you help me to know how can revive these VD?
We have important information in this device, any data can not be accesed by NX3500, although the others DG are optimal.
DELL-Sam L
Community Manager
•
8058 Posts
•
34386 Points
3798
0
Posted February 8th, 2019 07:00
Hello caroh,
The best thing to do would be to look at a support bundle to see what is going on. Based on what you stated it sounds like you have a ninja failure on your MD3200, but there could be another issue as well. I will send you a private message so that you can send me the support bundle, so I can review it.
Please let us know if you have any other questions.