UNSOLVED
D
dliefbroer
4 Posts
0
18080
September 21st, 2011 05:00
Touchpad driver failes with ConfigMgr OSD
We are trying to use the M6600 A00 CAB as a driver package for Windows 7 x64. Made the driver package using Dell Client Deployment Pack 1.2. During deployment the following errors occur (version difference because I am now trying the newest driver)
Importing driver D:\_SMSTaskSequence\drivers\6\R310070\Vi64\Apfiltr.inf ...
IBSLIB PublishMessage: Publishing message [Windows Setup could not install one or more boot-critical drivers. To install Windows, make sure that the drivers are valid, and restart the installation.]
According to Microsoft this means the driver is not properly signed. I've seen the 32-bit version being inserted just fine, it's 64-bit that's stopping my deployment.
Importing driver D:\_SMSTaskSequence\drivers\6\R310070\Vi64\Apfiltr.inf ...
IBSLIB PublishMessage: Publishing message [Windows Setup could not install one or more boot-critical drivers. To install Windows, make sure that the drivers are valid, and restart the installation.]
According to Microsoft this means the driver is not properly signed. I've seen the 32-bit version being inserted just fine, it's 64-bit that's stopping my deployment.
dliefbroer
4 Posts
593
0
Posted September 23rd, 2011 02:00
As the A02 pack uses R302450 and I already tested with the newer version R310070, this was bound to fail.. I'm removing the driver from our deployment as we can't continu at this moment.DELL-Warren B
1 Rookie
•
1124 Posts
593
0
Posted September 23rd, 2011 08:00
Thanks for the details. I forwarded them to the dev team.DELL-Warren B
1 Rookie
•
1124 Posts
593
0
Posted September 29th, 2011 07:00
the dev team informed me that the Touchpad driver requires .Net Framework 4.0 to function. Do you have that included in your build? Download link below.
http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=17851dliefbroer
4 Posts
593
0
Posted September 29th, 2011 08:00
The driver pack is applied in ConfigMgr before the OS is installed. When should I install .Net?DELL-Warren B
1 Rookie
•
1124 Posts
593
0
Posted September 29th, 2011 09:00
It would probably be best to have it included in your OS build. The driver installation essentially takes place when the OS boots for the first time.dliefbroer
4 Posts
593
0
Posted September 30th, 2011 01:00
Please see the first post. I'm not doing anything special in the Task Sequence to deploy the machine.
Basic steps:
Apply image
Apply Driver pack
Setup Windows
During the last step setup stops with the message in the first post. This is exactly as you propose and it doesn't work.
I've again removed the driver from the driver package as we can't deploy at the moment. I also had to remove it from the E6500 driver package as this contains the same ALPS driver. After removing it from the E6500 package it still errors out, but I'm investigating that one.
If this can't be resolved via the forum, please let me know, so I can contact Dell Support myself.VivekAgarwal2
1 Message
593
0
Posted October 11th, 2011 06:00
Please deploy the image on a Virtual Machine
Then install the Net Framework 4.0
Capture the image
Use this image for deployment
DELL-Warren B
1 Rookie
•
1124 Posts
593
0
Posted September 22nd, 2011 08:00
http://ftp.dell.com/sysman/M6600-win7-A02-R314070.CAB