Attachment uploads are currently disabled. This is a temporary situation and will resume as normal in the coming days.
UNSOLVED
R
rmccoy0317
1 Rookie
•
1 Message
0
1098
January 3rd, 2023 07:00
EqualLogic PS4210 Controller switch to Passive
So our battery on Controller 0 is end of life. I have already replaced the battery on Controller 1 which is/was the standby. That went smooth so we are good there. I then went into the Maintenace tab to hit the restart button to switch the active controller from 0 to 1. I hit the button but it will not switch the active to standby. Is there something else I need to hit?
dwilliam62
6 Operator
•
1516 Posts
•
6374 Points
794
0
Posted March 11th, 2023 22:00
Hello,
FYI: A restart won't work if, as I suspect both cache batteries have expired.
Regards,
Don
#iworkfordell
Praveen.Singh
4 Apprentice
•
489 Posts
•
17 Points
795
0
Posted March 11th, 2023 22:00
As already suggested try :-GrpName>restart
dwilliam62
6 Operator
•
1516 Posts
•
6374 Points
698
0
Posted January 3rd, 2023 08:00
Hello,
The restart (failover) won't work if the primary has an error. You can try using "restart" at the CLI of that member. GrpName>restart
If that fails, best option is to shutdown your servers, then shutdown that array. GrpName>shutdown
Then remove the controller, replace the battery and power the array back up.
Regards,
Don
#iworkfordell