Solved!
Go to SolutionP
pradeep_p_s
1 Rookie
•
8 Posts
0
5434
April 25th, 2018 04:00
isi_helathcheck command
I see there is a isi_healthcheck command in 8.1, but it's no where mentioned in cli guide or in support KB article
Anyone have idea what this command does, i tried running the command but not sure where to look for logs or output
-Thanks
Pradeep
crklosterman
450 Posts
4203
1
Posted April 25th, 2018 08:00
In general commands on Isilon with an underscore in them are un-documented and are for support/engineering use only.
Some Examples:
- isi_for_array (send commands to any number of nodes)
- isi_radish (ask for data about a particular disk; this may be deprecated)
- isi_vol_copy (NDMP-dump ingest from NetApp 7M)
- isi_vol_copy_vnx (NDMP-dump ingest from a VNX/Celerra)
So I wouldn't expect it to be documented is my point. If you want to run a health-check there are other ways of doing it, or you can usually ask support to assist under an active maintenance contract. (just don't open it as a SEV1 SR)
~Chris
mitom1
2 Posts
4203
1
Posted April 25th, 2018 22:00
I think you can use 'isi healthcheck' instead. Refer to the command help and/or online manual isi-healthcheck(8) for more detail.
# man isi-healthcheck
isi-healthcheck(8) isi-healthcheck(8)
NAME
isi-healthcheck -- Run healthchecks and view the results.
DESCRIPTION
The healthcheck command allows administrators to run healthchecks and
view the results.
# isi healthcheck
Description:
Run healthchecks and view the results.
Required Privileges:
ISI_PRIV_SYS_SUPPORT
Usage:
isi healthcheck
[--timeout ]
[{--help | -h}]
Subcommands:
Available checklists and items:
checklists List and view checklists.
items List and view healthcheck items.
Evaluations and results:
evaluations Run, cancel, pause, resume, list and view evaluations.*
parameters Set, delete, list and view parameters.
Options:
Display Options:
--timeout
Number of seconds for a command timeout (specified as 'isi --timeout NNN ').
--help | -h
Display help for this command.
See 'isi healthcheck --help' for more information on a specific subcommand.
* Actions under this collection can be specified as subcommands directly under 'isi healthcheck' e.g. 'isi healthcheck list'