Further to my above note , customer have added Isilon Management IP's in the ICAP servers to successful build the connection between ISILON & ICAP servers.

So the traffic is flowing on Management subnet between ISILON to ICAP(Anti virus) using  1Gige subnet but customer would like to use the Data Subnet (10 gige) instead Managemnet subnet for the traffic to flow between ISILON & ICAP server.

how this can be achieved to reroute the Antivirus traffic from management subnet to Data subnet.

Do they have static 10G IPs? Can't they change to Data Subnet IPs (10G)  in ICAP servers?

yes they do have SMB Pools (static 10gige IP's).

when they change to Data Subnet IP's(10gige) in ICAP servers the connection between ICAP & ISILON is lost where the ICAP server status changes from active to inactive in isilon.

Further if the add both Management (1Gige) & Data (10gige) IP's in ICAP server again the connection between ICAP & ISILON is lost.

Only the Connection is established with Management IP's in ICAP server where Antivirus scanning also works fine with these IP's in place.

but customer wants to use 10gige interface instead 1gige

1 gige are in system access zone...

10 gige are in Data Access zone... SMB pool belongs to Data Access zone which is using 10gige aggregation interface

What Access Zones are the Static 10G IPs in? Are the 1G IPs in the System Access Zone?

ok I can try this out and will let you know if its going to work. i hope by placing the Data IP's of 10gige is system access zone will not impact the user connections to isilon and the performance.

will try this out and share the results.. thanks.

I recall ICAP IPs has to be in System Access Zone. Can you put some 10G  IPs in System Access Zone.

8.0.0.3

BTW, What version of OneFS are you using?

What Access Zones are the AV servers on? On management Zone?