UNSOLVED

jsims07

updated

20 years ago

J

jsims07

2 Posts

0

9057

January 2nd, 2007 22:00

Upgrading

Well, I've recently decided to upgrade my current computer, a Dimension 4600. I've been reading through alot of the posts here and have almost decided what I'm going to do.  I just wanted to check with people who know, to see if what I decided will work. I'm not looking for a huge upgrade, just something to hold me over until summer when I plan on getting something new.
 
I plan on using it for partially for gaming (low-mid level graphics setting probably) so keep that in mind.
 
As far as a graphics card, would this be ok? http://www.newegg.com/Product/Product.asp?Item=N82E16814150190 
I'm not completely sure what I'm supposed to look for for compatibility.
 
I also figured I should beef up my ram some (currently have 512mb).  I was thinking about going with these: http://www.newegg.com/Product/Product.asp?Item=N82E16820145439
 
Is there anything else I would need to get to install those?
 
And is there something better in the same price range?
 
Thanks in advance!
 
  • jsims07

    2 Posts

    79

    0

    Posted January 2nd, 2007 23:00

    Thanks for the help!
     
    I may be back before too long to get help with the install though. :)
     
    I assume the ram will not be too bad to work with (everything I've seen says to just pop it in)
     
    The vid card will probably be a little more involved though I guess.
  • Oletymer

    2 Intern

    •

    977 Posts

    79

    0

    Posted January 2nd, 2007 23:00

    They are very good choices.   Both will work well in your Dim. 4600.  About the only thing you could do better with the stock PSU would be a 7600GT AGP.
     
    But that would cost you about $50 to $65 more.  The Leadtek is about $169 and a XFX about $186 at Newegg.      The GS should meet the needs you stated.
     
     
     
     
     
     
     
    Thermaltake Tsumani Dream Case, Black with Side Window.
    ASUS P5N SLI Socket 775 NVIDIA nForce 570 MB.
    Pentium D 945 @ 4.08 GHz with Zalman CNPS 9500 AT Cooler.
    2 Gigs (2x1GB) Corsair XMS PC 5400 675 Memory.
    2 X eVGA 7900GTs @ 700/1800 Volt Modded, with Zalman VF900-CUs.
    OCZ PowerStream 600 Watt. ADJ. SLI. PSU.
  • Dale Nihiser

    2 Intern

    •

    2030 Posts

    79

    0

    Posted January 2nd, 2007 23:00



    jsims07 wrote:
     
    ...As far as a graphics card, would this be ok? http://www.newegg.com/Product/Product.asp?Item=N82E16814150190 
    I'm not completely sure what I'm supposed to look for for compatibility.
     
    I also figured I should beef up my ram some (currently have 512mb).  I was thinking about going with these: http://www.newegg.com/Product/Product.asp?Item=N82E16820145439 ...
     
    Thanks in advance!
     


    Both should work just fine.  I use Corsair in my home built and works great but I use Crucial in my Dells as they're a little more finicky.   Corsair should work.
     
    Good LucK
    Dale
     
    Cool Master Centurion 5 CAC-T05 Mid tower case
    AMD Athlon 64 3700+--->AMD Athlon 64 4000+ San Diego
    MSI K8N Neo4-F Socket 939 ATX motherboard
    1GB Cosair ValueSelect PC 3200 DDR 400 SDRAM
    EVGA GeForce 6800GS 256Mb GDDR3 PCI Express
    Maxtor DiamondMax 10 200Gb 7200rpm SATA 150 HD
    Plextor 708A 8x burner
    OCz GameXstream 700 watt psu
    Logitech Optical Mouse MX310
    Logitech Wingman Rumblepad
    Altec-Lansing headphones w/mic
    Viewsonic G90fb-2 19"
    Windows XP Home Sp2(all updates)
    D-Link 524 Wireless Ethernet Broadband Router

    Message Edited by Dale Nihiser on 01-02-200707:31 PM