OK

But I need power somewhere and I dont know where to put the cable in the computer :smileytongue:

As I recall, my D8200 didn't have a spare molex connector but my video card did come with a y-splitter so I pulled the power connector to my hard drive, attached it to the splitter and then attached one end back on the hard drive and the other end to the video card. If your card didn't come with a splitter then you can get one for a few dollars at your local computer store. My card said to use the hard drive. Some folks recommend using the power connector from an optical drive.

_______________________________________________________________________
Dimension 8200 (July 2002)
3.06Ghz P4 w/HT 533fsb---------------------------------------768mb pc800 rdram
128mb BFG GeForce 6800oc (16 pipes enabled)--------Dell 250W PSU
Sound Blaster Audigy2 ZS -------------------------------------Logitech Z-5300E 5.1 THX
P992 19" Flat Screen Monitor----------------------------------Floppy Drive
40X CD-RW--------------------------------------------------------80GB Ultra ATA HD
Intel 10/100M PCI Network Card

Oh sorry I am a little bit tierd.

but i have really big "sticks" at the back of my video card and I dont know where to find a cable that fits the "sticks" (or pins dont know).

Thanks Rutger 

Message Edited by Rutger_46 on 11-22-200512:21 PM

Message Edited by Rutger_46 on 11-22-2005 12:22 PM