Solved!
Go to SolutionGetting error like nsrlcpd is not running
Hi,
The Library is working fine , but i would try to do mounting the tape and take inventory or labeling the tape immediately getting an error like nsrlcpd is not running , I checked the nsrlcpd service , it is running and in inquire i can see the library and i dit find any problem in configuring the library through the jbconfig , I removed the zoning in library and again added that , still there is a problem . What might be a problem .
Rajesh S
The Library is working fine , but i would try to do mounting the tape and take inventory or labeling the tape immediately getting an error like nsrlcpd is not running , I checked the nsrlcpd service , it is running and in inquire i can see the library and i dit find any problem in configuring the library through the jbconfig , I removed the zoning in library and again added that , still there is a problem . What might be a problem .
Rajesh S
- Thanks for the Soultion , I made a host entry changes like before the hostname is in caps and i checked the Storage node name it is small letters over there . SO imade a changes int he host entry just changed to small letters and now it is working fien , Any how thanks a lot for the immed. response .
Rajesh S - yes exactly nsrmmgd and nsrlcpd is running , How can i stop that , If we made any hosts entry it works on previous time but this time is not working , What might be the issue . Kindly help , I need to retirve 1 TB of data , its important . Now the same error is coming like nsrlcpd is not running , But service status it is showing like nsrlcpd is running . Kindly help me .
Rajesh S amediratta
2 Intern
•
2014 Posts
1326
1
Posted April 10th, 2009 11:00
Which Networker version is this? Try using NW 7.3.4 OR 7.4.4 as they are more stable in library functionalities than any other version of their own series.- Hi all,
I had this issue in March and there are new binaries available. Please log an SR on Powerlink and the Technical Dept. should give you the new binaries.
Remember to rename the old binaries to "_old" so that you can fallback if there is a need.
After changing the binaries on my Backup server, I had no issues with NSRLCPD not running.
Thanks.
kbuis
11 Posts
1322
0
Posted March 24th, 2009 07:00
How are you attempting to do the mount, inventory or label operation? Please check your storage node for the NetWorker server Is it listed long name or short name? Is this listed the same way as the NetWorker Server is listed for the server configuration? They should match.