
UNSOLVED
S
SainathPawar
35 Posts
0
3122
August 27th, 2014 01:00
Incremental File System backup using NMM failed
Dear All,
Incremental File System backup using NMM has been failed,only Full backup is running successfully
92347:nsrsnap:***************** Snapshot Management operation has started, logging to "C:\Program Files\EMC NetWorker\nsr\logs\nwsnap.raw" *****************[nsrsnap.c 610] Calling nsrrm_host
[nsrsnap.c 907] Calling get_pool_name..
52051:nsrsnap:Printing savecmd=nsrsnap_vss_save after parsing
79549:nsrsnap:[nsrsnap.c 2037] Invoking command: "nsrsnap_vss_save -A optype=conventional -A "NSR_SNAP_TYPE=vss" -A NSR_PARENT_JOBID=488442 -c -g "Test_Group" -LL -m -s SYSTEM COMPONENTS:\ -t 1408771438 -l incr -W 78 -A snap_sessionid=1408964623 -A NSR_STRICT_SYNC=0 "[nsrsnap.c 2047] Calling start_savecmd..
C:\ D:\ SYSTEM COMPONENTS:\
[nsrsnap.c 2060] Calling snap_wait..
[nsrsnap.c 2081] Calling parse_fs_logs_and_prefix..
86745:nsrsnap_vss_save:Version information for C:\Program Files\EMC NetWorker\nsr\bin\nsrsnap_vss_save.exe:
Original file name: nsrsnap_vss_save.exe
Version: 2.4.1.122
Comments: NetWorker Module for Microsoft Applications (x64)
50411:nsrsnap_vss_save:nsrsnap_vss_save: Data mover host name not specified. Assuming local host: bemavmwdb2.barry-callebaut.com
50412:nsrsnap_vss_save:nsrsnap_vss_save: Invalid argument: -g is specified without snap_sessionID
50338:nsrsnap_vss_save:
usage: nsrsnap_vss_save [ ]
50420:nsrsnap_vss_save: options: [-mvWL] [-c client-name] [-f dirfile]
50421:nsrsnap_vss_save: [-g group]
43597:nsrsnap_vss_save: [-s server]
50422:nsrsnap_vss_save: [-A key=value]
67780:nsrsnap_vss_save: [-G dumps VSS Writer metadata to XML files, one per writer.]
67781:nsrsnap_vss_save: [-? displays valid application data save set entries.]
62872:nsrsnap_vss_save:nsrsnap_vss_save: snapvss_validateAparams()failed to validate one or more Application Information parameters
68151:nsrsnap_vss_save:nsrsnap_vss_save: Exiting with failure.
: retried 1 times.
Thanks & Regards
Sainath
Responses (21)
Solutions (0)
SainathPawar
35 Posts
1219
0
Posted August 27th, 2014 06:00
Hi Carlos,
Thanks For your reply.
We have Checked Group as well Client Properties and Seems to be everything is OK as per your Checks.
Please find attachment
.
Reply SainathPawar
35 Posts
1219
0
Posted August 31st, 2014 23:00
Dear All,
Any Update on this...
Thanks & Regards
Sainath Pawar
Reply CarlosRojas
1 Rookie
•
1693 Posts
1104
0
Posted September 2nd, 2014 05:00
Hi Sainath,
Can you please disable the "Perform virtual Synthetic full" option in the group properties?
Group properties-> Advanced tab-> bottom right part of the screen.
If you don't see this option then enable the diagnostic mode by clicking on "View->Diagnostic mode".
Thank you,
Carlos
Reply SainathPawar
35 Posts
1219
0
Posted September 2nd, 2014 23:00
Hi Crazyrov,
We are Using NetWorker 8.1.1.7.Build.333
Thanks & Regards
Sainath
Reply SainathPawar
35 Posts
1219
0
Posted September 3rd, 2014 03:00
Hi Crazyrow,
We have Windows Server 2003 & 2008 OS Machine. Yes Full Backup has been completing without any issue.
Thanks & Regards
Sainath
Reply SainathPawar
35 Posts
1104
0
Posted September 3rd, 2014 03:00
Hi Carlos,
I have Disable the " Perform Virtual Synthetic full" option in the group .
But still it has been Failed with the Same error.
Thanks & Regards
Sainath PawarReply Well, we have tried it on server 2003 and it did not work. The reason given by support."NMM 2.4.1 is not compatible with Windows 2003".
well, the windows 2008 should work though. i would suggest you to install NMM 3.1 with NetWorker client 8.1.1 for windows 2008. The file-system backup is traditional (without snapshot).
Reply

CarlosRojas
1 Rookie
•
1693 Posts
1221
0
Posted August 27th, 2014 03:00
Hello Sainath,
I see something already that points to wrong configuration.
1.- Client retires has to be set to 0
2.- All values on the right side of the advanced tab in group configuration has to be set to 0
3.- Make sure the "backup renamed directories" option is not checked in client configuration.
4.- Make sure there is no directive set for the client.
Can you please attach screenshots of all the group configuration tabs and same for the client?
Thank you,
Carlos