Start a Conversation
UNSOLVED

Gilaadmin

updated

16 years ago

G

Gilaadmin

6 Posts

0

1839

May 26th, 2010 21:00

Networker 7.5.1 Client_server issue

Greetings,

   I am have a issue with a server not being backed up through the NMC.  It states Probe job had unrecoverable failure(s), this job is being abandoned.   I have been able to go into the Networker client and do backup from there. it is able to connect to the Networker and backup successfully.  However, the other day I attempted to recover files from that server hand recieved an error stating  ;

   No index was found. You have not backed up any files from the source machine, or you need to be connected to the serveras a supervisor.

   I am logged on as the admin and have intiated backup several times.  Also, from networker, I am able to see the server. And can see the networker from the client server

Thanks for any ideas

Kaz

  • H

    hari_prakash

    22 Posts

    765

    1

    Posted May 27th, 2010 01:00

    Hi Kaz,

    The manual backup works fine & the scheduled backups fail with "Probe job had unrecoverable failure(s)".

    This could be communcation issue between server & client ,

    1) ping

    2) rpcinfo -p hostname ( from server specify clientname & viceversa )

    3) add an entry in the hosts file with IP address , FQDN & shortname of the client & re-run the backups from the NMC.

    HTH.

  • V

    vipin_joy

    32 Posts

    765

    1

    Posted May 27th, 2010 02:00

    Kaz,

    As suggested there seems to be a communication fault.

    In addition to the steps posted by Hari, say if there is a Firewall do make sure that the necessary ports are available bi-directionally.

    Vipin

  • R

    rovinabi

    55 Posts

    765

    1

    Posted May 27th, 2010 03:00

    Hi,

         In addition to what Vipin and Hari have said here, also check the entries in the clients servers file. Ensure that the first entry in the servers file is the hostname of the NetWorker server.

    HTH,

    Rovin D'Souza.

  • G

    Gilaadmin

    6 Posts

    765

    0

    Posted June 2nd, 2010 17:00

    Rovin,

    Thank you for you time, I was wonder if you could be more descriptive on where to look.  I am under the impressionto check in the configuration button under clients. want to make sure I am looking in the correct area.

    Kaz

  • G

    Gilaadmin

    6 Posts

    765

    0

    Posted June 2nd, 2010 17:00

    Hari,

    i was able to ping both ways. I also added the info to the hosts files.  not sure what I am looking for when I use the command rpcinfo -p hostname.  If you could describe for me I would appreciate it.

    Thank you for the assistance

  • H

    hari_prakash

    22 Posts

    765

    0

    Posted June 3rd, 2010 01:00

    Kaz,

       1) Run rpcinfo -p client_name ( from the server ) & rpcinfo -p server_name ( from client ).

       2) run telnet client_name 7937 to 7940 ( run the command from the server , This confirms whether it is able to communicate to nsrexecd ports.)

       3) Add the IP address & fqdn & shortname of the client on the Aliases filed on the client properties.

       4) If the client is of windows , check for the firewall settings & raise a exception from 7937-7940 ( both on TCP & UDP Ports ).

    HTH.

  • H

    hclavago

    3 Posts

    765

    0

    Posted August 27th, 2010 01:00

    Kaz,

    We faced the same problem in couple of our new servers relased for testing.

    When backup was configured and tested it failed with error"Probe job had unrecoverable failure(s), this job is being abandoned" .

    Troubleshooting steps,

    From client Check #rpcinfo -p

    & From Networker server check #rpcinfo -p

    If fails make the entry of IP, FQDN & shortname in /etc/hosts of client. Then check rpcinfo -p

    If rpcinfo works and still backup fails,

    chk forward & reverse nslookup to Networker server,

    Also check nslookup localhost...if  that fails confirm its a server misconfiguration.

    Get this fixed by server admin & trigger the backup,,,it completes successfully.

    Shan..

Dell Support Resources

Latest Solutions

View More