UNSOLVED
Yes. I am following the directions in the 6.5.4.20 upgrade manual and they say the version can be obtained from the console log on switch boot-up. I am trying to avoid rebooting the switch again. I also tried show tech-support.
#show version
Machine Description............... Dell EMC Networking Switch
System Model ID................... N3048
Machine Type...................... Dell EMC Networking N3048
Serial Number..................... CN0H784T2829847H0XXXXXX
Manufacturer...................... 0xbc00
Burned In MAC Address............. F8B1.564A.39C6
System Object ID.................. 1.3.6.1.4.1.674.10895.3058
SOC Version....................... BCM56340_A0
HW Version........................ 5
CPLD Version...................... 13
Image File........................ N3000AdvLitev6.5.4.20
Software Capability............... Stack Limit = 8, VLAN Limit = 1024unit active backup current-active next-active
---- ----------- ----------- -------------- --------------
1 6.5.4.20 6.1.2.4 6.5.4.20 6.5.4.20
2 6.5.4.20 6.1.2.4 6.5.4.20 6.5.4.20DELL-Charles R
Moderator
•
4730 Posts
•
25476 Points
271
0
Posted October 3rd, 2022 08:00
Hello lolcat2,
I think that #show switch can give you that information.
Page 2270-2275:
DELL-Charles R
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!
DELL-Marco B
Moderator
•
3980 Posts
281
0
Posted October 3rd, 2022 00:00
Hello,
did you try with show version command?
DELL- Marco B
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!